The maintenance measures of the paper slitter are indispensable. This can effectively extend the service life of the paper slitter and reduce the probability of failure of the paper slitter. So what should I do specifically?
        The maintenance of the paper slitting machine must implement the principle of "emphasis on maintenance and prevention, mainly on prevention", so that regular maintenance and compulsory implementation should be carried out, and the relationship between use, maintenance and repair should be properly handled.
        To maintain the quality of the paper slitter, to ensure the quality, according to the specified items and requirements one by one, no warranty or no warranty. Each team must do a good job of maintaining all kinds of machinery according to the maintenance rules and maintenance categories of the paper slitter, but generally it should not exceed half of the specified maintenance interval.
        When maintaining and maintaining the paper slitter, you can do it from the above aspects. Maintain the paper slitter, so that our paper slitter will have a longer service life.
        After reading the above, I believe everyone already knows the maintenance measures for the paper slitter.

        Many people do not know how to maintain the paper cutting machine, which will affect the life of the paper cutting machine. How should the paper cutting machine be maintained?
         1. Pay attention to safety when using it. Do not stretch your hand over the blade when the machine is turning.
         2. If the user needs a workpiece with a special cutting width, it can be made into various types of special gaskets of our company.
        3. Grease the lubrication holes regularly to prevent the rotating shaft from wearing due to lack of normal lubrication.
        4. When the rod nylon washer needs to be used for a long time, if the cutting burr is seriously damaged, it should stop working immediately, open it next to the cover, loosen the nut with a special wrench, loosen the screw, and remove the swing rod.
        5. The power supply should be safely grounded to ensure no leakage.
        The above is the maintenance of the paper slitter, I believe everyone already knows.

        At present, the technology of high-speed slitting machines in China is not powerful, and the technology of many countries is ahead of us. Let's take a look at the technology of high-speed slitting machines.
        1. Poor complete set, domestic paper cutters are rarely equipped with peripheral equipment, is the cutting production line.
        2. The control system is backward and there is no automatic detection device, because China is just beginning to use PLC, but foreign countries have fully used a full line of computer control. Using the computer to monitor and condition each execution component, you can also set parameters in advance, which greatly shortens operating hours.
        3. There is a certain gap in appearance and ease of use. However, through the efforts of domestic paper cutter manufacturers in recent years, the gap between domestic paper cutters and foreign products is rapidly narrowing, and some technologies are even at the leading level. Foreign ones are basically color microcomputer program control, while domestic ones mainly use digital display. Mainly, a large number of mechanical paper cutters lacking security protection exist and are sold. Microcomputer-controlled paper cutters are the development trend of paper cutters, and are replacing paper with other control methods in a large area with a relatively fast speed.
        After reading the above, I believe everyone already knows the technology of high-speed slitting machine.

        The speed of the development of the slitter industry is relatively slow, which has a great relationship with China's scientific and technological strength, so what causes it? The following slitting machine manufacturers come to understand it in detail.
        First of all, the quality of the products produced by the company is not high, and the production capacity is excessive. Mainly because some small enterprises lack technology, product quality is not good, and some users lack some basic common sense, prone to security accidents.
        Secondly, the electrical content of mechanical equipment such as slitters is not high. Enterprises invest less in research and development, and most slitters are relatively backward. This level is far from foreign standards.
        Finally, the company is not concentrated and its competitive advantage is not obvious. In a good industry, they will form a cluster structure and promote reasonable communication between enterprises.
        In the slitting machine industry, most enterprises are scattered, without clusters, lack of overall competitive advantage, different technologies and operations, blind production.

        Paper slitters are used in many places now, but problems will inevitably occur during use, such as the bursting phenomenon, so how should this phenomenon be solved? Let's analyze it together.
        1. When we cut the composite film with bursting ribs on only two sides, when the kilometer roll received about 300 meters, before the bursting ribs did not show up, swap the rolls on the two sides of the rewinding shaft; When you receive about 700 meters, you need to adjust each other again, so that the finished rolls you receive will not appear to burst. Thereby reducing losses and improving yield.
        2. When we receive multiple kilometer rolls with bursting ribs on multiple screens, when winding around 300 meters, we will replace a roll of film with no problem before the bursting ribs are not displayed and continue to wind up. In this way, the burst ribs can not be expressed, and the film will not be stretched and deformed, thereby improving the yield.
        3. Sprinkle a small amount of sanitary-grade smooth powder during the winding of the slitting machine, which can also alleviate the bursting phenomenon.
        4. The general situation of bursting of ribs only appears on squeezed products, and the occurrence of ribs on dry-recovered products rarely occurs.
        After reading the above, I believe everyone already knows the solution to the bursting phenomenon of the paper slitter.