The slitting machine has many functions. It brings a lot of help to life. The processing of many products in life requires the help of the slitting machine. The following slitting machine manufacturers share the slitting function.
1. Divide the roll; divide the large roll diameter material into multiple rolls of small roll diameter material, easy to use.
2. Trimming; cutting off the technological blanks required in the production of the next process
3. Rewind; make the material change direction and wind the irregular materials neatly, make small rolls into large rolls, etc.
4. Cutting; the wide-width material is divided into multiple small-roll materials by slitting to meet the packaging specifications.
After reading the above content, I believe everyone already knows the cutting effect of the cutting machine.

        In the process of the slitting machine, we need to fully grasp the on-site factors. This can help the efficiency of the slitting machine without problems. Let's take a look at the on-site factors with the slitting machine manufacturer.
        I. Methodological factors
        Refers to the rules and regulations to be followed in the production process. It includes: process flow, process control guidelines, production drawings, production process standards, inspection standards, various operating procedures, etc. Their role here is to accurately and timely reflect the requirements of product production and product quality. Operating strictly in accordance with regulations is the only condition to ensure product quality and production progress.
        Personnel factors
        It refers to all the people at the scene, including the supervisor, the production line employees, the driver, the porter and all existing people. At the scene, the supervisors at all levels of the workshop should first understand their employees. People are the most difficult point in production management and quality management, and also the focus of all current management theories. Around this "human" factor, various companies have different management methods.
        Third, the material factor
        Refers to all kinds of materials, accessories, raw materials and other production materials. The production raw materials are very critical. Generally, there are several materials formulated and made. When a certain material has a problem, it will cause problems in the material of the entire product and cause the material to fail. Therefore, the supply department is required to: purchase fixed, reliable and qualified suppliers' materials; ensure that all materials are qualified; enter the factory must have the supplier's self-inspection report and incoming inspection report, qualified Can be used in the warehouse.
        Environmental factors
        Supervisors at all levels shall organize to determine and manage the working environment required to meet product compliance requirements. Because the environment also affects the quality of the product, such as: narrow and cluttered workplaces, dark lighting, poor access, excessive noise, excessive dust, etc.

        Slitting machine is a very important kind of equipment at present, but it often appears the situation of running shaft, so what is the cause of this failure? Let's take a look at the cutting machine manufacturers.
        The slitting machine cuts the film into the inner and outer sides for winding, and the inner and outer winding stations are installed on the beam controlled by the hydraulic cylinder. Under the control of the hydraulic cylinder, the beam is rotated back and forth within a certain angle range through the telescopic movement of the piston and connecting rod of the hydraulic cylinder, thereby achieving the purpose of ensuring the pressure required for normal winding and loading and unloading. Analyze the automatic control process and the faults that occur.
        In the working process of the slitting machine, the internal and external beams often move at the same time to the unwinding direction, so that the product in the rewinding direction moves with the unwinding direction, and finally the rewinding pressure roller is separated from the product, and the rewinding pressure is lost. The film deviates from the outer layer of the product, causing the film to break, which cannot be produced, and the timing of the emergence is irregular. Sometimes when the slitting machine is just turned on, sometimes after the slitting is rolled up to a certain length.
        After reading the above content, I believe that everyone already knows the reason why the slitter runs.

        During the use of the slitter, its tension will change. So what is the reason for the tension change of the slitter? The following slitting machine manufacturers share the factors of tension changes.
        1. During the rewinding and unwinding process of the slitting machine, the diameter of the rewinding and unwinding is constantly changing. The change in diameter will inevitably cause the change of the tension of the raw material. Unwinding under the condition of constant braking torque, the diameter will decrease and the tension will increase accordingly. Rewinding is the opposite. If the rewinding torque is constant, the tension will decrease as the rewinding diameter increases. This is the main factor that causes the tension of raw materials to change during operation;
        2. The change of the lifting speed of the machine will inevitably cause the change of the tension of the whole machine:
        3. Non-uniformity of slitting raw materials. For example, the fluctuation of the material elasticity, the thickness change of the material along the width and length, the eccentric mass of the roll, and the changes in the temperature and humidity of the production environment will also affect the tension fluctuation of the machine;
        4. The change in the tightness of the raw material coil will also cause the change of the tension of the whole machine;
        5. The change in speed during slitting affects the change in tension: when the speed is increased or decreased during operation, the speed of the main motor changes. First, the tension of the material in the unwinding traction to the winding section is caused to change momentarily, and the material must be slightly vibrated after a period of time to gradually stabilize the tension. The instability of this tension is manifested by the uneven winding on the finished roll and the unevenness on the end surface, which affects the product quality.
        6. The transmission mechanism of the slitting machine (such as guide roller, floating roller, flattening roller, etc.) has factors such as imbalance and unstable air pressure.
        After reading the above content, I believe that everyone already knows the factors that change the tension of the slitting machine.

        In today's life, there are many ways to buy slitting machines. We can buy them in nearby stores or through the Internet. These purchase methods have different advantages. So it is good to buy products from slitting machine manufacturers. ?
        Find the direct sales of the slitting machine manufacturer, because we need to install it after the purchase, and if we buy this equipment in the big brand specialty store, they will demonstrate the specific operation process for us, and there will be a special person for us Deliver the equipment to your door and provide installation services. This service can help us solve many problems and save us a lot of troubles. So in life, if we find it troublesome, or if we don't know how to install it, we can buy it at a nearby specialty store.
        Buying online, because the products sold on the Internet after all save the rent, employees' wages and other aspects, so the price will be lower when selling. And they will send this machine to their homes, so it is more convenient and appropriate.
        After reading the above content, I believe that everyone already knows the advantages of purchasing products at the slitter manufacturer.