Slitting machine is a very important kind of equipment at present, but it often appears the situation of running shaft, so what is the cause of this failure? Let's take a look at the cutting machine manufacturers.
        The slitting machine cuts the film into the inner and outer sides for winding, and the inner and outer winding stations are installed on the beam controlled by the hydraulic cylinder. Under the control of the hydraulic cylinder, the beam is rotated back and forth within a certain angle range through the telescopic movement of the piston and connecting rod of the hydraulic cylinder, thereby achieving the purpose of ensuring the pressure required for normal winding and loading and unloading. Analyze the automatic control process and the faults that occur.
        In the working process of the slitting machine, the internal and external beams often move at the same time to the unwinding direction, so that the product in the rewinding direction moves with the unwinding direction, and finally the rewinding pressure roller is separated from the product, and the rewinding pressure is lost. The film deviates from the outer layer of the product, causing the film to break, which cannot be produced, and the timing of the emergence is irregular. Sometimes when the slitting machine is just turned on, sometimes after the slitting is rolled up to a certain length.

        After reading the above content, I believe that everyone already knows the reason why the slitter runs.