Now many people have to enter the slitting machine industry, but they do not know where to start. It is not an easy task to create a slitting machine manufacturer. Let's take a look at the starting method of the slitting machine manufacturer.
        The storefront is the first impression the brand presents to the consumer. A good storefront can increase consumer confidence in the brand. However, if the storefront environment is not good, it will affect not only the brand image, but also miss many existing Or potential consumers. Generally speaking, in addition to the reason of the slitting machine itself, if the product sales are not good, it is mostly because of storefront problems, which may be due to the poor location of the storefront, resulting in low passenger flow, or the storefront area is too small, and the products displayed are few, It may also be that the decoration of the store is not good enough to attract consumers, or it may be due to unreasonable store design and sample display. Therefore, slitting machine manufacturers must pay attention to store building, and build the store according to their own actual conditions in order to attract consumers, enhance consumers' reputation for the brand, and better realize the cause of Xinyang stainless steel seamless pipes.
        After the slitter manufacturers build the store, they need to start to promote the brand and products, and carry out multi-channel publicity. The slitter manufacturers can use retail channels, community channels, network channels, etc. to conduct multi-channel publicity to promote brands and products. Improve local brand and product awareness, and better develop Xinyang stainless steel seamless pipe business.
        Whether it is to create a storefront or to promote brands and products, the support of the team is indispensable. The team management of the slitting machine manufacturers is also very important. The success of a career is inseparable from the solidarity and assistance of the personnel. A good team management can mobilize the enthusiasm of employees to better serve the enterprise. Improper team management will affect product sales and even cause loss of enterprise resources. Therefore, team management is the focus of slitting machine manufacturers.
        After reading the above, I believe everyone already knows how to start the slitter manufacturer.

The processing of high-speed slitting machine needs to prepare a lot of materials, and there are many tools involved. The following will follow the slitter manufacturer to understand the tools and materials used in high-speed slitting opportunities.
Slitting information: double-coated paper roll, coated paper, white cardboard roll, self-adhesive paper roll, kraft paper roll, etc.
Use tools: screwdriver, allen, pliers, wrench, hammer, card steaming pliers, special wrench, small blade.
After reading the above content, I believe everyone already knows the tools and materials needed for the high-speed slitting machine.

        Nowadays, many paper slitting machines will encounter such a problem during use. That is, there is insufficient tension in the paper slitting opportunity. How should we solve this situation?
         When the voltage of the upper and lower tension controllers that control the magnetic powder clutch of the paper slitter is adjusted to a high level, the winding tension is still insufficient and the winding film is loose. At this time, we can easily grasp the winding shaft by hand and stop it Turn. This shows that the output torque of the magnetic powder clutch of the high-speed cutting machine is insufficient. The reason is that the magnetic powder in it is reduced or failed due to the long time. Then you can continue to work normally.
        After reading the above, I believe everyone already knows the solution to the lack of tension in the paper slitter.

        Many people cannot operate flexibly when operating a high-speed cutting machine, which results in the high-speed cutting machine working efficiency is not high or can not work normally, so how to use the high-speed cutting machine flexibly?
        First of all, before using the slitter, you should first sweep out all the safety hazards in the operation site. At the same time, pay attention to check whether the slitter data is normal, check whether the voltage is normal, and whether the current is normal and stable.
        Secondly, turn on the power switch of the hydraulic system of the slitter to check whether the oil level and pressure gauge of the main hydraulic drive system are correct and stable. Again, open the pneumatic shut-off valve of the slitter to check whether the air pressure is correct and stable.
        Next is the setting control of the paper tube machine of the slitter, and the slitting menu is set according to the film type, thickness, length, width, etc. arranged in the slitting plan. File the corresponding BOPP film file from the PDF. Set the winding length and width of the corresponding standard film. Select the corresponding winding station, adjust the roller arm and roller, and install the paper core of the corresponding specifications.
        Then, it is the feeding of the slitter paper tube machine, and the film is passed through. After all, it is the start-up operation and application control of the slitting machine.
        After reading the above, I believe everyone already knows the flexible use of high-speed slitting machines.

        Many people are not following the rules of the high-speed slitting machine when they operate the high-speed slitting machine, so that the rules can make the high-speed slitting machine better use, so what do they need to obey?
        1. Check whether the number of joints on the cross-section of the product is the same as the number of the self-connected one. If the hot-melt adhesive applicator does not match, immediately rewind and check to prevent the inner joint from being mixed into the product.
        2. Lead all the slitted film to the winding shaft according to the operation requirements. When the hot melt adhesive machine passes through the film, no blade is allowed on the machine to prevent scratches.
        3. Stop pressing the stop button. When unwinding, do not allow your hands to touch the winding shaft to prevent your fingers from being caught.
        4. Put the paper tube that meets the specifications on the take-up shaft, cut the products that meet the requirements into the paper tubes of the upper and lower take-up shafts drawn according to the normal method, start at a low speed, and find out that the paper tube is suitable on the take-up shaft Mark the location of the installation to facilitate the next installation. When installing the paper tube, the hand must grasp the surface of the paper tube to prevent it from falling and being injured by the shaft.
        5. Start at a slow speed, observe whether the slitting film meets the quality requirements, and then slowly accelerate to start slitting. When the machine is running, it is strictly forbidden to put your hand into the machine, so as not to press the back of the hand.
        6. Open (close) the raw material bracket to a suitable width, and place the semi-finished film roll to be cut on the bracket. When loading, the hand must leave the film roll section. Two people are not allowed to operate at the same time to prevent hand Clamped by the cylinder.
        7. According to the characteristics of the semi-finished product, adjust the EPC device to ensure that the EPC photoelectricity is always on the tracking line, and pull the end of the film with the hand to start the film at a low speed to make the film go into normal.
        8. Return the photoelectricity to the center position to ensure that the slider of the unwinding table is kept in the proper position in the middle of the guide bar.
        9. Install the cutting knife holder to the appropriate position according to the requirements of the task list, fasten the lower knife, and then start at a low speed to cut the semi-finished product into the required specifications.
        After reading the above, I believe everyone already knows the rules that high-speed slitters need to follow.