Paper slitters are used in many places now, but problems will inevitably occur during use, such as the bursting phenomenon, so how should this phenomenon be solved? Let's analyze it together.
        1. When we cut the composite film with bursting ribs on only two sides, when the kilometer roll received about 300 meters, before the bursting ribs did not show up, swap the rolls on the two sides of the rewinding shaft; When you receive about 700 meters, you need to adjust each other again, so that the finished rolls you receive will not appear to burst. Thereby reducing losses and improving yield.
        2. When we receive multiple kilometer rolls with bursting ribs on multiple screens, when winding around 300 meters, we will replace a roll of film with no problem before the bursting ribs are not displayed and continue to wind up. In this way, the burst ribs can not be expressed, and the film will not be stretched and deformed, thereby improving the yield.
        3. Sprinkle a small amount of sanitary-grade smooth powder during the winding of the slitting machine, which can also alleviate the bursting phenomenon.
        4. The general situation of bursting of ribs only appears on squeezed products, and the occurrence of ribs on dry-recovered products rarely occurs.

        After reading the above, I believe everyone already knows the solution to the bursting phenomenon of the paper slitter.