In the process of using the automatic slitting machine, bursting tends to occur, so how to solve this problem?
If you want to solve the bursting phenomenon of the slitter, you must know the process of bursting. Bursting is a bulging phenomenon caused by the accumulation of tolerances due to the large thickness tolerance of the film when slitting the film.
When slitting a composite film with ribs on only two sides, when the paper tube machine factory received about 300 meters, before the ribs did not show up, the rolls on the two sides of the reel were swapped. When it reaches about seven hundred meters, you can adjust each other again, so that the finished product rolls will not be burst. When receiving multiple kilometer rolls with bursting ribs on multiple screens, when winding around 300 meters, replace a roll of film with no problem before the bursting ribs do not show up and continue to wind up. In this way, the burst ribs cannot be expressed, and the film will not be stretched and deformed, thereby improving the paper tube mechanical yield.
Sprinkle a small amount of sanitary-grade smooth powder during the winding of the slitting machine, which can also alleviate the bursting phenomenon.
After reading the above content, I believe that everyone already knows the solution to the bursting phenomenon of the automatic slitting machine.
Different high-speed slitting machines have different prices, so where is the gap? The following slitter manufacturers will tell you about the secrets of the industry.
1. The model of the product determines the price of the slitter
For the same product, in order to meet the needs of more markets in the production process, it is always necessary to produce different types of products of the same product to meet the needs of consumers. For different types of products, Because the production process and process are different, the price of the product is also different.
2. The material of the product determines the price of the slitter
For any product, they have to use different materials for processing. The price of products with different materials is also different. Therefore, the material of the product determines the price of the high-speed cutting machine; the price of materials is also determined by the market. Demand and supply are determined, so fluctuations in material prices directly affect the price of the product itself.
All in all, the factors that affect the price of high-speed slitting machines are mainly the above aspects.
In the process of selecting a fully automatic slitting machine, there are many factors we have to consider, so that we can buy good quality products, so what do we need to consider?
1. Choose a manufacturer with large scale and strong strength.
Although automatic slitting machines are more common now and have a long history, they still require a lot of technical and financial support. Only products developed under such conditions will have quality assurance and normal slitting. Effect, so in comparison, scale and strength are more important points for us to choose when fully automatic cutting.
2. Choose good reputation.
"Word-of-mouth" has always been an important factor in all walks of life. Generally speaking, choosing a good word-of-mouth will reduce the risk a lot, but everything can't be absolute, because things like "slip list" and "praise" are now common On the basis of good reputation, we must pay attention to screening and choose carefully.
3. Pay attention to price considerations.
Price has always been an important factor in measuring the quality of products. Of course, it does not mean that the high quality of the price is necessarily good, but in most cases it is consistent with this law. In general, we need to be more cautious about products that are too low in price, because the cost of manufacturing fully automatic slitter products is not low, and if the price is too low, it may not achieve the effect of real purification.
After reading the above, I believe everyone already knows the factors that need to be considered when choosing a fully automatic slitting machine.
During the purchase process of the high-speed slitting machine, there are many issues that we need to pay attention to, so what are the problems?
1. Determine the brand of high-speed cutting machine
It is understood that there are many high-speed slitting machines on the market, and different brands have different quality, performance and price. Before purchasing, you can log on to the relevant website of the slitting machine to understand the relevant situation of the slitting machine industry, such as which products sell well in the industry and which products have a good reputation in the market.
2. Find a good manufacturer to customize
It is not difficult to customize the slitting machine, just contact a professional manufacturer. When purchasing, you may wish to find a strong slitter manufacturer.
3. Pay attention to the price of oil fume purifier
The comparison found that different models, different qualities, and different manufacturers of high-speed slitters offer different prices. Based on this, on the premise of ensuring the quality of the high-speed cutting machine, choose the one with the lowest quotation as much as possible to reduce the purchase cost.
After reading the above content, I believe everyone already understands the issues that need to be paid attention to when buying a high-speed slitter.
The maintenance method of the automatic slitting machine must be selected correctly, so as not to affect the life of the automatic slitting machine. The specific maintenance method of the automatic slitting machine is analyzed below.
1. Perform maintenance on time
The automatic cutting machine has a certain working life, but if we can take good care of it, we can extend its service life. Therefore, we should develop a good habit of timely maintenance in daily life, so that not only can keep the automatic cutting machine clean, but also improve its processing efficiency.
2. Take the right approach
When purchasing the automatic slitting machine, you must keep the instructions properly, because the instructions will give a detailed introduction to the maintenance and cleaning of the automatic slitting machine. According to the instructions, we can understand how to start and know how to be better. Finish cleaning it. If we don't have this ability ourselves, we can ask professional staff to help us maintain it.