What are the safe operating specifications for paper slitters? Let's take a look below.
1. The input voltage is three live wires and one neutral wire. Hold the porcelain handle when closing and pulling to avoid electric shock.
2. Use an allen wrench every day to check whether the cross screw of the winding shaft is firm. If it is loose, tighten it in time.
3. Keep the whole machine clean, wipe off the oil stains in time, and remove the plastic strips on the winding.
4. Feeding: The two large rubber shafts on the slitting machine cannot pass through the material to avoid scratching.
5. Distinguish the side selection of the electric eye, distinguish between manual and automatic, you can move the unwinding shaft left and right when manual, and switch to manual when power off.
6. When cutting, adjust the left and right devices of the unwinding with the hand wheel, so that the closing contact is in the middle of the two switches.
After reading the above, I believe that everyone already knows the safe operating specifications of the paper slitter.
What are the main development directions of high-speed slitting machines? Let's take a look below.
The development direction of high-speed slitting machine is mainly manifested in the following aspects. Frame structure, whether it is one-time slitting or two, three-time slitting, high-speed slitting machine manufacturers should invest their energy and study on the frame structure to effectively Focus on, design a more reasonable slitting machine, get rid of the plagiarism phenomenon of the currently produced slitting machine, research and design a personalized slitting machine, so that the cutting of different materials is more detailed in the structure, in the next round of the international market In the competition, it provides film manufacturers with a favorable weapon, and also finds a blue ocean for their own companies. In the automation control part, the current level of automation of the slitter produced in China is still at the lower middle level, although the use of domestic control original devices It has been very popular and the price is relatively low, but the depth of domestic slitting machine manufacturers is far behind the level of foreign developed countries, especially in the structure of the control system and the slitting machine, and the lack of slitting materials Organic integration, at this level, the vast majority of domestic slitting machines still stay on the thick line, and have not yet deeply understood the rigor and rationality of the slitter control system. The internal slitting machine manufacturer should proceed from the above directions to find a method that meets the principle of slitting machine control and can maximize the use of the functions provided by the hardware. Manufacturing, this is the face of China's manufacturing industry. Common problem, any mechanical equipment, in addition to being reasonable in design, requires precision in manufacturing, and China's manufacturing industry is lacking in this regard.In addition, the manufacturing process is also a weak link, manufacturing slitting equipment, In addition to some general-purpose machine tools, some special equipment for manufacturing slitting machines, such as dynamic balancing machines, water cutting machines, etc., are required. Due to the high manufacturing precision requirements of slitting machines, some equipment requires CNC machine tools to process parts In particular, it is necessary to popularize the use of machining centers, so that the machining accuracy of the manufactured slitter can be fundamentally guaranteed.
After reading the above content, I believe everyone already knows the development direction of the high-speed slitting machine.
The high-speed slitting machine sometimes shakes, so what is the main reason?
Generally speaking, if there is no deformation of the base paper core of the slitting machine, there will be no shaking, but if the chuck of the base paper is forced to be clamped, there will be an imbalance on both sides. Control will cause a bad influence, so we must pay attention to the balance on both sides during the paper loading process.
All in all, the reason why the high-speed slitter is shaking is the above situation.
How should the slitter go in the future? Slitting machine is a mechanical device that cuts wide-width paper, mica tape or film into multiple narrow-width materials. It is commonly used in papermaking machinery, wire and cable mica tape and printing and packaging machinery. The main application of the slitting machine: non-woven fabric; mica tape, paper, insulation materials and various film materials, especially suitable for the narrow band (non-woven fabric, paper, insulation materials, mica tape, film, etc.) cut.
At present, the development trend of the world slitter is the high-tech and practical, high-efficiency production, energy-saving products, high utilization of resources and commercialization of scientific research results.
However, compared with foreign products, China still has a relatively large gap in the level of science and technology, which is far from meeting domestic demand. Specialization is the road that China's mechanical products should take in the future.
China's slitting machine lacks high-precision, high-tech, high-quality supporting products, product performance is low, stability and reliability are relatively poor; and the domestic industry lacks leading enterprises, the technical level is not high, the production scale is not large, The product quality is not high. To a certain extent, it relies on extensive operation by increasing capital investment and expanding production scale.
However, China's slitting machine has already got some awareness in this regard, and has begun to accelerate the pace of approaching the technological advantages of digitalization, automation, and mechatronics. However, if we want to realize the high modernization of equipment and the strategy of going out, we still We need to accelerate the growth of the junior college, and strive to catch up with the international trend.
What are the structural advantages of the slitter? What is the role of various structures? Let's take a look with the slitting machine manufacturers.
1. A compression cylinder is installed near the base, and a set of support rod bearings are installed on the upper end of the cylinder's support rod to support the main shaft.
2. A spindle for processing paper tubes is installed in the middle of the slitter rewinder. The front end of the spindle is fixed on the base with a set of bearings, and a pulley is installed in the middle of the set of bearings
3. The support frame of the main cutter shaft is also provided at the top of the slitter rewinder, and a support cylinder is installed in the middle of the support frame.
4. The main cutter shaft is installed on the upper end of the slitter rewinder, and a number of blades are arranged on it, and are arranged according to a certain gap;
The above is the analysis of the structural advantages of the slitter.