What are the safe operating specifications for paper slitters? Let's take a look below.
        1. The input voltage is three live wires and one neutral wire. Hold the porcelain handle when closing and pulling to avoid electric shock.
        2. Use an allen wrench every day to check whether the cross screw of the winding shaft is firm. If it is loose, tighten it in time.
        3. Keep the whole machine clean, wipe off the oil stains in time, and remove the plastic strips on the winding.
        4. Feeding: The two large rubber shafts on the slitting machine cannot pass through the material to avoid scratching.
        5. Distinguish the side selection of the electric eye, distinguish between manual and automatic, you can move the unwinding shaft left and right when manual, and switch to manual when power off.
        6. When cutting, adjust the left and right devices of the unwinding with the hand wheel, so that the closing contact is in the middle of the two switches.

       After reading the above, I believe that everyone already knows the safe operating specifications of the paper slitter.