The paper slitter is an indispensable device in life. For the sake of safety, we must pay attention to many operating specifications. Let's take a look together.
        1. Shut down for help if you cannot solve the problem, do not continue to run the machine under abnormal conditions.
        2. Safe production is a necessary prerequisite, and safety matters must be paid attention to during operation.
        3. When adjusting the knife, first use an air gun to clean up the dust, and then carry out the knife adjustment process.
        4. For some base paper core problems, please pay attention to the proper chuck clamping of the base paper core.
        5. Pull out the gas shaft by cutting, and support water pipes must be added on both sides. Pay attention to pull out the gas shaft safely.
        6. When performing edge blowing, first stop the machine and put the paper into the tube, then restart the machine.
        7. To stop the machine when encountering abnormal problems, you must press the red key to stop the emergency. Develop the correct emergency shutdown habit.
        8. In the case of paper padding, keep a certain distance from the plastic shaft and the paper tray to avoid injury.
        9. When loading the original paper, when the original paper passes through the cutter, the paper rolls up when the paper rolls up, and then the paper must be adjusted.
        10 When using an air gun to clean the dust on the knife, first try to spray out the water inside for a period of time. If the gas from the air gun contains water, dry the shaft with a rag before continuing.
        11. When using the knife slide to deal with the damaged paper of the base paper, be careful not to damage the inner paper.
        12. When blowing, pay attention to the stability of the flash when accelerating.
        13. In the case of paper of category c, slow down the speed as much as possible to avoid paper breaks (1200 rpm and 1800 rpm is 5 minutes slower when the paper is broken and unloaded and then the time difference is 7 minutes).
        14. When the core of the base paper is deformed and the base paper rotates slowly, pay attention to the speed adjustment to reduce the speed as much as possible.
        15. When the original paper is cut to the end, slow down properly to avoid paper break.

         I believe everyone knows the operation specifications of the above paper slitter.