What are the structural advantages of the slitter? What is the role of various structures? Let's take a look with the slitting machine manufacturers.
        1. A compression cylinder is installed near the base, and a set of support rod bearings are installed on the upper end of the cylinder's support rod to support the main shaft.
        2. A spindle for processing paper tubes is installed in the middle of the slitter rewinder. The front end of the spindle is fixed on the base with a set of bearings, and a pulley is installed in the middle of the set of bearings
        3. The support frame of the main cutter shaft is also provided at the top of the slitter rewinder, and a support cylinder is installed in the middle of the support frame.
        4. The main cutter shaft is installed on the upper end of the slitter rewinder, and a number of blades are arranged on it, and are arranged according to a certain gap;
        The above is the analysis of the structural advantages of the slitter.

        At present, there are many slitting machine manufacturers, which leads to fierce competition in the market, so how can slitting machine manufacturers get better development?
        In the process of operating the slitting machine manufacturer, can the business status of the enterprise be improved, and can the enterprise really obtain a good business status in the future, which is closely related to the technological innovation of the enterprise. In the current slitting machine industry, in fact, the slitter blades produced by each enterprise are basically the same. Even if there are differences, they are only small differences.
         This is not a good thing for an enterprise, which proves that the competition is more intense and the development market of the enterprise is shrinking. In order to kill a bloody path under such circumstances, enterprises should innovate in production technology, or innovate in their business model. If the enterprise has no innovation, it is inevitable that the enterprise encounters a bottleneck in the process of operation.
        If the company is completely ignorant of these issues in the process of operation, then sooner or later the company will fail when it is operating. At that time, it is basically a fool ’s thing to let your own company have better business performance. In addition, Another point is to tell you that the technical parameters of the slitting machine are different, that is to say, if its specifications are different, then the performance and quality of this thing in the process of use are also different. So in fact, the technical parameters themselves are quite significant. At least by looking at the technical parameters, we can quickly grasp a lot of basic information about the slitter blades.
        The above is the development method of slitting machine manufacturers.

        How should the high-speed slitting machine operate with high precision? What are the precautions? Let's take a look with the slitting machine manufacturers.
        1. Turn the cutting mode switch to the printing state, dial forward, reverse key to adjust the position of the data cut, rotate the electric eye seat handwheel, move the electric eye to the standard position, adjust the flexibility of the electric eye, and according to the working time of the electric eye The photoelectric mode is selected, and the detection mode switch is set to the slow detection gear.
        2. Length setting value = practical material length-early value (1-3mm)
        3. Turn on the power and turn on the power of each component, press the run button, and check the interval between the cursor and the color mark of the electric eye.It is generally 1-2mm. After adjustment, set the detection mode switch to the fast detection state.
        4.The high-speed damping bar pressure makes the material film produce a certain resistance on the damping bar, adjust the swing roller tension spring, so that the data adheres to a certain tension between the blocking roller and the feeding roller, and prevents overshoot during the tracking of the electric eye.
        5. Gradually increase the speed of the main machine, and at the same time speed up the feeding speed, so that the data or the swing roller floats in the middle position, which means that the feeding speed matches the feeding and pulling speed.
        The above is the high-precision operation method of the high-speed slitting machine.

        Many slitting machine manufacturers want to increase sales, but there is no way, so how can the sales of high-speed slitting machines be increased?
        In order to improve the satisfaction of different cutting machines in different regions, according to special research, while using and purchasing, we guide users to pay more attention to the positive emotions and happy moods of products. And explain to the customer everything that makes the user feel more comfortable buying. However, some recent famous consumer psychology research shows it all. Even if the company's slitter is of good quality and good performance, it will not be recognized and understood by consumers. These problems must be solved. Because this puts the company into a more complicated situation.
        In order to change this situation, in order to change the user's thinking, the company has done a lot of publicity work to let more customers understand the product and make customers more effective. When you buy a slitter, you can use it and enjoy it at will. At the same time, when they spend money on commodities, they can also make them more generous, so that this mentality will not contradict.
        Therefore, there are still many things that need to be done to increase the sales of high-speed slitters.

        At present, there are many manufacturers of slitting machines online, so how should we judge the strength of the manufacturers during the purchase process?
        Now the basic slitting machine manufacturers will establish their own official website. When we understand the product, we can check the quality of the product on the Internet. There will be a brief introduction under the basic product, which is helpful for our understanding and selection, but the Internet is not It is completely true, so it is necessary to distinguish all kinds of information, know the true and false, and then make the right choice.
        We want to have a better understanding of the slitting machine manufacturers. Let ’s go to the field inspection. During the selection process, we should not simply understand the information online. Through the field inspection, we can understand the manufacturer ’s production situation, quality, Services, etc., these things are helpful for us to judge the strength of slitting machine manufacturers.