How should the high-speed slitting machine operate with high precision? What are the precautions? Let's take a look with the slitting machine manufacturers.
        1. Turn the cutting mode switch to the printing state, dial forward, reverse key to adjust the position of the data cut, rotate the electric eye seat handwheel, move the electric eye to the standard position, adjust the flexibility of the electric eye, and according to the working time of the electric eye The photoelectric mode is selected, and the detection mode switch is set to the slow detection gear.
        2. Length setting value = practical material length-early value (1-3mm)
        3. Turn on the power and turn on the power of each component, press the run button, and check the interval between the cursor and the color mark of the electric eye.It is generally 1-2mm. After adjustment, set the detection mode switch to the fast detection state.
        4.The high-speed damping bar pressure makes the material film produce a certain resistance on the damping bar, adjust the swing roller tension spring, so that the data adheres to a certain tension between the blocking roller and the feeding roller, and prevents overshoot during the tracking of the electric eye.
        5. Gradually increase the speed of the main machine, and at the same time speed up the feeding speed, so that the data or the swing roller floats in the middle position, which means that the feeding speed matches the feeding and pulling speed.
        The above is the high-precision operation method of the high-speed slitting machine.