The automatic slitting machine is a material for cutting large and large rolls of paper, film and non-woven fabric into narrow-width web materials, mainly used in papermaking machinery and printing and packaging machinery. The automatic slitting machine runs smoothly, the closing paper roll is firm and the noise is low; the strips after slitting are smooth and flat on both sides, very beautiful, without burrs. Its design is very reasonable, the weight is very light, and it is simple, and the price is very cheap.

The automatic slitting machine is an important part of the oil lubrication when it is being maintained. It ensures that the automatic slitting machine can work in an orderly manner. When using the automatic cutting machine, the automatic cutting machine also needs to change the oil regularly, cleaning oil filtering. The device and this prevents oil blockage. It is also necessary to keep the various components of the fully automatic slitter clean and lubricated to ensure operational flexibility in the automatic die cutting machine.

First of all, look at the advantages of the automatic slitting machine. First, the winding of the paper is firm, the sides are flat, and the noise is very low. Second, its operation is very convenient, and the strips after slitting are smooth and flat on both sides without burrs. Third, its adaptability is very strong, the upper and lower knives can be adjusted between 2 - 1700mm. Fourth, its output is also very high, and the single machine output can be used by three coilers. When we use the automatic slitting machine to start, we must ensure the correctness and stability of the voltage and current voltage values. Before the equipment is in operation, all personnel present must leave the equipment, which ensures personal safety so that it can be turned on. Also, when the automatic slitter is running, do not touch the running mold roll or roll core with your hands to avoid injury. In the final operation, it is forbidden to scratch or cut each roller core with a knife or a hard object. Secondly, look at the matters needing attention in the use of automatic slitting machine. The automatic slitting machine is used for the production of papermaking machinery and printing and packaging machinery and paper tube. It is a wide-volume large-volume paper and film produced by Ribao Machinery. , non-woven fabrics and other materials are cut into a wide range of narrow and small rolls of mechanical equipment. The fully automatic slitter is a powder clutch that acts as a resistance device to control small tensions. The automatic slitter disc is firmly wound, the sides are flat, and the sound is very low. Its operation is very smooth. The operation of the automatic slitting machine is also very convenient. The two sides of the cut paper bag are not only smooth but also flat without burrs. Its adaptability is also very strong, and the output is also very high. The precautions for the automatic slitting machine must first be known to ensure that the hydraulic value of the voltage and current is correct and stable before starting the machine. Then also note that all the people must leave the equipment before the equipment of the automatic slitter is ready to run, thus ensuring human safety. Finally, be aware that during the operation of the fully automatic slitter, do not scratch or cut the cores with a knife or hard object. In short, be sure to pay attention when using a fully automatic slitter. The automatic slitting machine is produced by Japanese machinery. It is a machine that divides a relatively large width of paper, or a film or a non-woven material into a wide and narrow material. It is generally used in papermaking machinery and printing and packaging machinery. Production of paper tubes.

The precautions for the use of slitting machine are:
1. The machine power supply uses three-phase four-wire system (AC380V) and is safely grounded to ensure operator safety.
2. The host speed should be adjusted to the minimum speed before starting the machine.
3. Be careful when installing the blade to avoid scratching the blade
4. Regular maintenance should be carried out on the place where the machine needs to be refueled.
5. The spindle and the circular knife use a continuously variable transmission system, which can work with high and low speed regulation and forward and reverse switching control.
6. The double-sided sharpening system is equipped with diamond grinding. The life of the grinding wheel can be up to two years, and the blade does not need to be disassembled. The knife can be sharpened and the blade is sharp for a long time to achieve the best cutting quality. It is also equipped with a vacuum cleaner to keep the fabric and track clean.
7. Imported ball slides are used to parallelly advance the cutting width, and the imported precision ball screw and slide rails are used to control the cutting width and 0.1 mm to achieve high-precision cutting.
8. Adopting imported ball slides, parallel propulsion and cutting. Imported AC motor adjustment system is steplessly adjusted to control the cutting speed and is not easy to wear, achieving high quality cutting.
9. The operation interface uses the LCD Chinese display, which can directly input several kinds of cutting width and quantity settings, and has manual and automatic conversion functions.
10. With a fast material discharge design, one step is in place. Loading and unloading can be done in one operation.

The slitting length can be set continuously. If there is an error in the length of the slitting, it is easy to stop the calibration by setting the parameters.
Process request for slitting machine
1. The slitting machine should stop the whole length or the whole original data from cutting and cutting. For example, plastic packaging materials, packaging cartons, steel plates, film, leather, wood chips, etc. should be cut and cut, and fixed length cutting should be used. control.
2. The fixed length slitting control is divided into static and dynamic slitting: precise stop when the set length arrives, then static slitting processing, restart after the slitting; when the set length arrives, no stop is issued. The cutting signal and the slitting machine are dynamically slitting during the data movement.
3. The most important performance index of fixed length slitting is the cutting precision, and the divergence length is good.
4. The length of the slitting can be set continuously. If there is an error in the length of the slitting, it is easy to stop the calibration by setting the parameters.