First of all, look at the advantages of the automatic slitting machine. First, the winding of the paper is firm, the sides are flat, and the noise is very low. Second, its operation is very convenient, and the strips after slitting are smooth and flat on both sides without burrs. Third, its adaptability is very strong, the upper and lower knives can be adjusted between 2 - 1700mm. Fourth, its output is also very high, and the single machine output can be used by three coilers. When we use the automatic slitting machine to start, we must ensure the correctness and stability of the voltage and current voltage values. Before the equipment is in operation, all personnel present must leave the equipment, which ensures personal safety so that it can be turned on. Also, when the automatic slitter is running, do not touch the running mold roll or roll core with your hands to avoid injury. In the final operation, it is forbidden to scratch or cut each roller core with a knife or a hard object. Secondly, look at the matters needing attention in the use of automatic slitting machine. The automatic slitting machine is used for the production of papermaking machinery and printing and packaging machinery and paper tube. It is a wide-volume large-volume paper and film produced by Ribao Machinery. , non-woven fabrics and other materials are cut into a wide range of narrow and small rolls of mechanical equipment. The fully automatic slitter is a powder clutch that acts as a resistance device to control small tensions. The automatic slitter disc is firmly wound, the sides are flat, and the sound is very low. Its operation is very smooth. The operation of the automatic slitting machine is also very convenient. The two sides of the cut paper bag are not only smooth but also flat without burrs. Its adaptability is also very strong, and the output is also very high. The precautions for the automatic slitting machine must first be known to ensure that the hydraulic value of the voltage and current is correct and stable before starting the machine. Then also note that all the people must leave the equipment before the equipment of the automatic slitter is ready to run, thus ensuring human safety. Finally, be aware that during the operation of the fully automatic slitter, do not scratch or cut the cores with a knife or hard object. In short, be sure to pay attention when using a fully automatic slitter. The automatic slitting machine is produced by Japanese machinery. It is a machine that divides a relatively large width of paper, or a film or a non-woven material into a wide and narrow material. It is generally used in papermaking machinery and printing and packaging machinery. Production of paper tubes.

            The paper of the automatic slitter is firmly wound, the sides are flat, and the noise is very low. Secondly, its operation is very convenient, and the strips after slitting are smooth and flat on both sides without burrs. Then, its adaptability is very strong, the upper and lower knives can be adjusted between 2 - 1700mm. Finally, its output is also very high, and the single machine output can be used by three coilers. When we use the automatic slitting machine to start, we must ensure the correctness and stability of the voltage and current voltage values. Before the equipment is in operation, all personnel present must leave the equipment, which ensures personal safety so that it can be turned on. Also, when the automatic slitter is running, do not touch the running mold roll or roll core with your hands to avoid injury. In the final operation, it is forbidden to scratch or cut each roller core with a knife or a hard object. Then take a look at how to maintain the automatic slitting machine! First, in the use of automatic cutting machine automatic cutting machine also needs to change the oil regularly, it is necessary to prevent the oil from clogging, but also to maintain the lubrication of the various parts of the automatic slitting machine, to ensure automatic cutting machine The flexibility of the operation. Secondly, in the use of fully automatic decomposition machine to check the elegant current of the circuit before starting to ensure the normal operation of the circuit, it is necessary to pay attention not to touch by hand to avoid injury, the automatic slitting machine is beautiful and light, simple It is cheap, and you must pay attention to maintenance when using it.