News

You are here: Home » News

How to maintain automatic cutting machine

  • Publish Time: 2019-07-19
  • Visit: 821
            The automatic slitting machine is an important part of the oil lubrication when it is being maintained. It ensures that the automatic slitting machine can work in an orderly manner. When using the automatic cutting machine, the automatic cutting machine also needs to change the oil regularly, cleaning oil filtering. The device and this prevents oil blockage. It is also necessary to keep the various components of the fully automatic slitter clean and lubricated to ensure operational flexibility in the automatic die cutting machine.

            Advantages of the automatic slitting machine First of all, the winding of his paper is firm, the sides are flat, and the noise is the lowest. Secondly, its operation is very convenient, and the strips after slitting are smooth and flat on both sides without burrs. Then, its adaptability is very strong, the upper and lower knives can be adjusted between 2 and 1700mm. Finally, its output is also very high, and the single machine output can be used by three coilers. When we use the automatic slitting machine to start, we must ensure the correctness and stability of the voltage and current voltage values. Before the equipment is in operation, all personnel present must leave the equipment, which ensures personal safety so that it can be turned on. Also, when the automatic slitter is running, do not touch the running mold roll or roll core with your hands to avoid injury. In the final operation, it is forbidden to scratch or cut each roller core with a knife or a hard object. The automatic slitting machine is used for the production of papermaking machinery and printing and packaging machinery and paper tube. It is a large-volume, large-volume paper, film, non-woven fabric and other materials produced by Ribao Machinery. Equipment. The fully automatic slitter is a powder clutch that acts as a resistance device to control small tensions. The automatic slitter disc is firmly wound, the sides are flat, and the sound is very low. Its operation is very smooth. The operation of the automatic slitting machine is also very convenient. The two sides of the cut paper bag are not only smooth but also flat without burrs. Its adaptability is also very strong, and the output is also very high. The precautions for the automatic slitting machine must first be known to ensure that the hydraulic value of the voltage and current is correct and stable before starting the machine. Then also note that all the people must leave the equipment before the equipment of the automatic slitter is ready to run, thus ensuring human safety. Finally, be aware that during the operation of the fully automatic slitter, do not scratch or cut the cores with a knife or hard object. In short, be sure to pay attention when using a fully automatic slitter. The precautions for the automatic slitting machine must first be known to ensure that the hydraulic value of the voltage and current is correct and stable before starting the machine. Then also note that all the people must leave the equipment before the equipment of the automatic slitter is ready to run, thus ensuring human safety. Finally, be aware that during the operation of the fully automatic slitter, do not scratch or cut the cores with a knife or hard object. In short, be sure to pay attention when using a fully automatic slitter.

Previous:
Automatic slitting machine introduction
Next:
Main items and maintenance knowledge of automatic slitting machine