The automatic slitting machine is a material for cutting large and large rolls of paper, film and non-woven fabric into narrow-width web materials, mainly used in papermaking machinery and printing and packaging machinery. The automatic slitting machine runs smoothly, the closing paper roll is firm and the noise is low; the strips after slitting are smooth and flat on both sides, very beautiful, without burrs. Its design is very reasonable, the weight is very light, and it is simple, and the price is very cheap.
           Let's take a look at the precautions of the front automatic slitter. 1. Before starting to use the check voltage, the correct and stable current is equal. 2. Before the equipment is ready for operation, all the staff next to it must be away from the equipment to ensure personal safety before starting the operation. 3, running, do not touch the running film roll or roll core by hand, do not draw a knife or hard object per core, in order to avoid being caught in the machine in hand, causing personal injury. 4. Regularly clean and inspect the machine. The automatic slitting machine does not stop for such a long time. The surface is wiped and coated with anti-rust oil, which can increase the service life. Let us look at how to repair and maintain the automatic slitting machine. First, the automatic cutting machine oil lubrication is an important part of the maintenance work. Paper machine oil to keep the road clear, so that the automatic slitting machine works efficiently and orderly. Second, periodically replace the oil of the automatic slitter and clean the oil filter to avoid a part of the oil blockage. Thirdly, the parts of the automatic slitter are kept clean and lubricated, so that it can be cleaned up on the machine that can run the ink, so the production efficiency is high. Fourth, keep the internal relay contacts of the electrical control box of the machine clean and prevent the machine from malfunctioning due to too much dust.

           During the design of the automatic slitter, there are many factors that enable the tension and variation of the automatic slitter. The advantages are obvious, and its main advantages are as follows. 1, running smoothly: resolutely take the reel, the sides of the plane, low noise. 2, easy to operate: the paper strip after slitting is smooth and flat on both sides, no burrs. 3, strong adaptability: the upper and lower knives can be adjusted between 2 and 1700mm. 4, high output: single machine output can be used by 3 coilers.