First, the automatic die cutting machine layout pressure is uneven
The surface pressure of the automatic die-cutting machine, this adjustment is not good, it will show the problem that the cutting edge is not lubricated, fluffed and exploded when die cutting. For the pressure adjustment of the layout, it is necessary to gradually pressurize from small to large. It should be small and should not be large. To make the pressures accepted by each layout common, if you want to get the pressure of ambition, you should press the proofs to check and then make adjustments.
Second, the automatic die cutting machine's die cutting machine is not high precision
The die-cutting blade of the fully automatic die-cutting machine is also a major element, and the problem caused by it is that the die-cutting precision is not high, and the cutting edge is not lubricated and fluffed during die cutting. Die-cutting knives must choose the best products of the appropriate type and standard to prevent the occurrence of various situations in the future.
Third, the automatic die-cutting machine has been stuck in the strip
The strips will form die-cutting plates and paste boards, affecting speed and quality. There are also tips for the strips when selecting. The low hardness is selected on both sides of the inlay line. The strip is 2 mm higher than the blade. The narrow local hardness is 0.5 mm higher than the blade.
Fourth, automatic die-cutting machine is prone to irregular creasing lines
Indentation lines, in order to prevent the occurrence of irregular pink lines on the indentation line, use an excellent indentation line. The hardness is moderate, the stability is strong, the lubrication of the thread is necessary, and then the appropriate height, thickness and standard are selected.

The above are the four major problems of the automatic die-cutting machine. How to avoid the occurrence and effective countermeasures, effectively solve the problem of the automatic die-cutting machine, improve its production efficiency and obtain profit.