The “Digital Printing in China” installed capacity and application survey entered the tenth large-scale research phase. Comparing the changes in the installed capacity of digital printing equipment in recent years, we found that no matter the total installed capacity, increment or geographical distribution, the application situation is not skyrocketing, but there are different degrees of fluctuation. According to the survey of digital printing users, cautious investment, exploration of transformation, innovative applications, and sound management have become new keywords. From the perspective of global economic situation and printing development, whether it is the development of advanced technology, high-speed inkjet technology, the continuous maturity of digital post-press technology, or the transformation of traditional Indian companies in the digital age, the global digital printing industry is facing Unprecedented opportunities and challenges. China's digital printing industry seems to have entered a new stage of development after more than a decade of germination. It is believed that with the support of relevant policies, the development of digital printing, a new industry, will enter a new stage and will bring more opportunities and profit growth points for printing practitioners.

First, when the die-cutting pressure becomes small, the position of the left and right claw-shaped blocks and the gear plate can be adjusted, the claw-shaped block moves upward, and the pressing force increases (the distance between the two faces is changed for each one of the claw-shaped blocks) The amount of change is about 0.1mm), and generally only one tooth is moved at a time. When the position of the claw block on the gear is at the uppermost last tooth, it should be considered to replace the new gear eccentric sleeve and the adjustment eccentric sleeve. It can also be adjusted by loosening the screw so that the toothed adjustment plate is disengaged from the gear eccentric sleeve, and turning the gear to the rear of the whole machine with the gear plate eccentric (note: the number of teeth rotating on both sides is equal, one rotation does not exceed Three teeth). Install the tooth type adjustment plate, tighten the screw, adjust the claw block to the first tooth, see the pressure cutting force number, the effect is not ideal, can be adjusted again, but it should be noted that the gear eccentric sleeve rotation number of teeth should be less than The number of teeth rotated for the first time. When the left or right pressure is too small, this method can also be used, that is, which side of the pressure is small to adjust the gear eccentric sleeve on the side, and the claw block is appropriately returned to 1-2 teeth during the trial cutting.

The flat pressure indentation cutting machine has a simple structure and is convenient to operate, but if the maintenance is improper, it will still cause a malfunction. Therefore, the machine must be used, adjusted and maintained in strict accordance with the requirements to ensure the normal operation of the machine to improve the quality of the product and extend the service life of the machine.

The flat-pressing and indentation cutting machine is a special equipment for pressing and cutting all kinds of ordinary cardboard, corrugated cardboard, plastic sheet and leather products, and is suitable for printing, packaging and packaging, and plastics industry. The utility model has the advantages of compact structure, excellent manufacturing pressure resistance, high precision, convenient use, safe and reliable operation and the like.

Semi-automatic flat die cutting machine is widely used in various industries, especially in the printing industry. It can be used from more than 250g whiteboard paper to 7mm corrugated paper to ensure higher operating rate of the equipment. The product.