Among many paper cutter products, program-controlled paper cutters and numerical control paper cutters are more common paper cutters. They both have computer storage systems of the same nature, but there are certain differences. Today we mainly come to understand the difference between a program-controlled paper cutter and a CNC paper cutter.
         Compared with NC paper cutting machine, the positioning accuracy of program-controlled paper cutting machine is more accurate, with an error of ± 0.02 mm, while the positioning error of NC paper cutting machine is ± 0.05 mm. The paper pusher speed of the program-controlled paper cutter is higher at 10 m / s or 12-14 m / s, while the paper pusher speed of the numerical control paper cutter is slightly slower at 8 m / s. The last is that the number of programmable groups of program-controlled paper cutters is more than that of CNC paper cutters. The above are the advantages of the program-controlled paper cutting machine over the CNC paper cutting machine, for reference only!

Program-controlled paper cutter is an indispensable equipment in the current paper processing process, and its danger factor is very high. Therefore, for everyone's use safety, Xiaobian specially compiled some operational precautions here. Hope to increase the safety factor of everyone using the program-controlled paper cutter.
1. The program-controlled paper cutting machine has many cutting objects, in addition to paper products, there are various materials. Therefore, it is very important to choose different pressures according to different materials. In addition, the cutting angle must be changed. Only in this way can the paper products be cut flat.
2. The angle adjustment of the cutting edge of the program-controlled paper cutter is very important. No matter what type of paper cutter equipment, it must have a high-quality paper cutting blade and sharpening process.
3. The safety screw of the equipment cannot be loosened, otherwise the cutter of the paper cutter equipment will not be durable and often fails.
4. For the cutting of each kind of paper, the pressure of the paper press is different. If it fails, it needs to be solved by its blade and cutting system.
The above are the precautions for the use of some program-controlled paper cutters. When operating the equipment, each operator should wear gloves and follow the operation records of the workshop. Only in this way can the safety of the paper cutter equipment be greatly improved.

         After long-term work of the program-controlled paper cutter, some normal wear and tear will occur on the mechanical part. These wear and tear will cause the size displayed on the screen to be different from the actual cut size. To solve this problem, we need to enter the "setting mode" to modify the relevant parameters of the machine.
        So how to enter the setting mode and modify the parameters?
        Start up first, and then follow the on-screen instructions to complete the initialization of the machine. After the initialization is completed, do not move the pusher, and directly measure the distance between the cutter and the pusher. Find the "function key" on the machine and click it, then select "setting mode", then enter the password to successfully enter "setting mode". At this time, three choices are displayed on the machine. We need to select the "Set Machine Reference" option. Enter the value of the distance measured between the cutter and the pusher into the "New Reference" and press "OK" to confirm the input. . Then press the "function key" to exit the "set machine reference" screen. Finally shut down and restart, and the modification is complete.

        Program controlled paper cutter is the crystallization of our 21st century science and technology. It is used to deal with the cutting needs of paper products in the printing industry. The development from the weak mechanical paper cutter to the practical and beautiful program-controlled paper cutter has shortened the cutting time of our paper products, increased accuracy and reduced labor costs, and made the operation safer.
        While we enjoy the convenience of technology, we also encounter many problems. Recently, the editor found that the cutter bar of the program-controlled paper cutter is cracked. What is the reason? It took a long time to find out.
        The original program-controlled paper cutter's knife bed movement was completed by the touch of a pull rod. In order to protect the safety of the machine, this pull rod is equipped with a secure pin. This secure pin is a stable device of cast iron layout. Cracking will occur when the pin is secured, and the knife will stop working, which can effectively ensure that we will not be accidentally injured when operating the machine.
        It is very troublesome to change the new safety pin when the machine is shut down. It is recommended that when cutting the self-made products, the height of each stack of paper must be the same, and not close to the right wall to avoid cracking of the safety pin.

        For the full-open process-controlled paper cutter, during its normal cutting process, sometimes we find that it will have such a situation. When our paper cutter's knife falls, its knife bed and paper press will It rises and resets randomly, and the red light indicator of the photoelectric sensor is still on when there is no obstacle in the corresponding part of the beam, and the cutting process cannot be performed normally. When we cut the button on the left side When you press it, you will find that the red indicator light is sometimes on, and the green indicator light is turned on immediately, but after cutting the packaging material, the red indicator lights are all on again, and the cutting cannot be continued. In the process, after pressing the trimming button on the left side, it can ensure that the red indicator light is scanned in full.
        Regarding the condition of the program-controlled paper cutter, when we analyzed the characteristics of its electric turbine dynamometer, we found that the left cutting button has a poor contact with electric shock, and when we replaced its corresponding switch, we found It is ready to work normally.