Paper cutter manufacturers believe that paper cutters will develop towards high precision. Paper cutters are a very important device in the paper processing industry. They are widely used in the printing and packaging industries and are one of the necessary equipment for paper processing enterprises. .
        Among the current paper cutter products, its high cutting accuracy, operating speed, degree of automation and intelligence are among the core technologies of the industry. Of course, with the development of science and technology, users have higher requirements for these parameters. For example, the cutting accuracy positioning of the paper cutter in the current industry must be kept within ± 0.025mm according to requirements.
        At present, due to factors such as lead screw clearance, transmission error, assembly quality and other factors, it is difficult to achieve the required accuracy of the paper cutter feeder positioning, and the improvement and improvement of mechanical parts are difficult to meet the requirements of high cutting accuracy, and cutting positioning The speed and accuracy of positioning have also put forward new requirements. Therefore, the future development of paper cutters is indeed mainly focused on its accuracy and automation, intelligence, and operating speed.

        As a professional equipment in the paper processing industry, paper cutters can cause a variety of situations such as product quality degradation, material waste, and equipment damage due to poor cutting. Therefore, when the paper cutting machine has a poor cutting situation, it should be handled as soon as possible to prevent the problem from becoming more serious.
        There are two main types of paper cutting failure.
        The first is that the paper cutter's inversion and the press are operating normally, but the cut paper is not perpendicular to the work surface, and the accuracy of the paper product is biased. This occurs basically because the cutter blade angle of the cutter is not appropriate, and the cutter should be replaced as soon as possible.
        The second case is that the paper cutter has a slow red return speed during the paper cutting process, and the cut line of the cut product is inclined. In this case, it is very obvious that the pressure of the paper cutter of the paper cutter is insufficient. As long as the pressure is increased, the effect can be achieved very well.
        It can be seen that the quality factors of the material of the paper cutter are largely concentrated on the cutter and the press. As long as these two problems are reasonably solved, the problem of poor cutting will be solved.

         Program controlled paper cutting machine is mainly composed of main machine (also known as gantry), work table, paper pushing mechanism, paper pressing mechanism, cutting mechanism and so on. The paper pushing mechanism is used to push the paper for positioning and make the back rules. The paper pressing mechanism is used to press the paper in place to ensure that the original positioning accuracy is not damaged during the cutting process. Side stop gauge, the worktable plays a supporting role. From the driving mode of the pressing mechanism, it is divided into mechanical pressing and hydraulic pressing.
         The hydraulic press method can more accurately ensure the same length tolerance accuracy (commonly known as the accuracy of the upper and lower knives) after the cutting of the cutting object, especially when the cutting density is large, the difference is particularly obvious. Therefore, with the emergence of hydraulic press-controlled program-controlled paper cutters, mechanical press-driven program-controlled paper cutters are no longer used by customers who require higher cutting accuracy.

        Program-controlled paper cutting machine is the best among paper cutting machine equipment in the printing industry. It is loved by the majority of enterprises in terms of convenience, safety and efficiency. Regarding the failure of the paper cutter in use.
         1. The electromagnetic switch is damaged so that the knife cannot be lowered. The solution: replace the electromagnetic switch with the same specification, the failure phenomenon is completely eliminated immediately, and the machine quickly resumes normal cutting production.
         2. Broken pin safety pin of the knife bed has a breakdown. Solution: When cutting small paper stacks, be sure to keep the height of each stack consistent, and do not place the stacks too close to the right wall panel.
         3. Poor contact of the motor contacts makes the pusher run abnormally. Solution: Check whether the terminal of the pusher motor is loose. If the wire is tightened, the abnormal sound of the pusher operation will immediately occur. eliminate.

         Why does the program-controlled paper cutter have a good market prospect? Let's analyze it in detail. First of all, program-controlled paper cutters are necessary equipment for many paper mills, but many of them were purchased decades ago. Previously, domestically-made program-controlled paper cutters were mechanical. Now they ca n’t keep up with the pace of the times and work efficiently. The low and unsatisfactory paper cutting effect have become the reasons for the new program-controlled paper cutter to replace it, so there will be a large number of program-controlled paper cutters that need to be replaced.
         Secondly, everyone knows that there is still a certain gap between China and other developed countries in the development level of machinery and other industries. Program-controlled paper cutting machines are no exception, but now China's economic and technological development is getting faster and faster, so program-controlled paper cutting The development of the machine is also inevitable. The above is an analysis of the market prospects of the program-controlled paper cutter. If the customer does not know anything, Maoyuan is willing to help you solve any problems.