As a professional equipment in the paper processing industry, paper cutters can cause a variety of situations such as product quality degradation, material waste, and equipment damage due to poor cutting. Therefore, when the paper cutting machine has a poor cutting situation, it should be handled as soon as possible to prevent the problem from becoming more serious.
        There are two main types of paper cutting failure.
        The first is that the paper cutter's inversion and the press are operating normally, but the cut paper is not perpendicular to the work surface, and the accuracy of the paper product is biased. This occurs basically because the cutter blade angle of the cutter is not appropriate, and the cutter should be replaced as soon as possible.
        The second case is that the paper cutter has a slow red return speed during the paper cutting process, and the cut line of the cut product is inclined. In this case, it is very obvious that the pressure of the paper cutter of the paper cutter is insufficient. As long as the pressure is increased, the effect can be achieved very well.

        It can be seen that the quality factors of the material of the paper cutter are largely concentrated on the cutter and the press. As long as these two problems are reasonably solved, the problem of poor cutting will be solved.