Program-controlled paper cutting machine is the best among paper cutting machine equipment in the printing industry. It is loved by the majority of enterprises in terms of convenience, safety and efficiency. Regarding the failure of the paper cutter in use.
1. The electromagnetic switch is damaged so that the knife cannot be lowered. The solution: replace the electromagnetic switch with the same specification, the failure phenomenon is completely eliminated immediately, and the machine quickly resumes normal cutting production.
2. Broken pin safety pin of the knife bed has a breakdown. Solution: When cutting small paper stacks, be sure to keep the height of each stack consistent, and do not place the stacks too close to the right wall panel.
3. Poor contact of the motor contacts makes the pusher run abnormally. Solution: Check whether the terminal of the pusher motor is loose. If the wire is tightened, the abnormal sound of the pusher operation will immediately occur. eliminate.
Why does the program-controlled paper cutter have a good market prospect? Let's analyze it in detail. First of all, program-controlled paper cutters are necessary equipment for many paper mills, but many of them were purchased decades ago. Previously, domestically-made program-controlled paper cutters were mechanical. Now they ca n’t keep up with the pace of the times and work efficiently. The low and unsatisfactory paper cutting effect have become the reasons for the new program-controlled paper cutter to replace it, so there will be a large number of program-controlled paper cutters that need to be replaced.
Secondly, everyone knows that there is still a certain gap between China and other developed countries in the development level of machinery and other industries. Program-controlled paper cutting machines are no exception, but now China's economic and technological development is getting faster and faster, so program-controlled paper cutting The development of the machine is also inevitable. The above is an analysis of the market prospects of the program-controlled paper cutter. If the customer does not know anything, Maoyuan is willing to help you solve any problems.
Now that science and technology are developed, cutting paper and cartons no longer need to be cut manually. They are all done with a paper cutter. The paper cutter can be divided into two types: gate knife type and knife roller type according to its working principle. Gate knife type paper cutter is used to cut large size sheet of paper into smaller size paper industry. Knife roller type paper cutter is used to cut roll paper into standard sheet of paper.
Knife-roller paper cutters are widely used because the paper-feeding and cutting devices of the knife-roller paper cutters only perform continuous movement, the structure is relatively simple, the production capacity is high, and several different length and width specifications can be cut simultaneously. Knife roll paper cutters can be divided into single-knife roll paper cutters and double-knife roll paper cutters according to different cross-cutting structures.
The cross-cutting device of the single-knife roll cutter uses a rotating roller cutter and a fixed bottom knife to cut the paper web. The cross-cutting device of the double-knife roll cutter has two synchronously rotating roller cutters to cut the paper Frame. Paper cutter is a necessary equipment for printing, newspaper and other industries. If you need, we will serve you wholeheartedly, your satisfaction, our peace of mind!
In our life, paper is an essential daily necessities for people. Our life is inseparable from paper, so how are neat and clean sheets cut and manufactured? This is inseparable from the role of paper cutters, so paper cutter manufacturers tell you why paper cutters are so commonly used today .
The paper cutter is used to handle paper cutting in the later stage of printing, and cut the paper into the size needed in our lives to meet our daily needs. Then, for paper cutters, there are many types of paper cutters, roughly divided into two types, one is a household paper cutter, and the other is an industrial paper cutter.
Household paper cutters include toilet paper cutters, napkin paper cutters, pump paper cutters, etc. These papers are used in our lives very much, and everyone uses these papers every day. Industrial paper cutting machine is divided into manual paper cutting machine, electric paper cutting machine, numerical control paper cutting machine and so on. It mainly cuts industrial paper. The paper cutter has brought a lot of convenience to our lives, which is why the paper cutter is so long used.
The emergence of program-controlled paper cutters ended the paper cutting era of human labor, and the paper cutting industry entered the era of science and technology. The program-controlled paper cutting machine uses an automatic control system throughout the process, and no longer needs to hire a large amount of manpower to complete the paper cutting process. The efficiency of a machine is comparable to the human labor efficiency of dozens of people. Safety.
Therefore, the program-controlled paper cutting machine is very popular in printing, paper mill and other occasions. Compared with manual paper cutting, the program-controlled paper cutting machine is relatively safe, but there is still a certain danger in itself. After all, it is a paper cutting machine. In the process of replacing the blade and other operations, if you pay little attention to it, there is still a possibility of injury. Therefore, during the operation, do not take it lightly and protect yourself.