After unremitting efforts, the level of domestic paper cutters and foreign products is rapidly shrinking. Old-fashioned paper cutters are constantly being replaced by multifunctional, fully automatic and other high-tech computer paper cutters. But even for high-tech products, failures are inevitable. Next Xiaobian takes everyone to understand the common failures of the band saw computer paper cutter in daily life.
1. When the clutch clearance is too large or the friction plate is worn, the blade does not return to the highest point after cutting.
2. When the blade edge is worn and the load is too large, the safety bolt will break.
3. The hydraulic oil concentration is too high, and the pressure of the press is insufficient.
4. If the blade is not adjusted to the horizontal position or the blade is not flat, the paper cannot be cut completely.
5. The paper is not pushed against the pusher, the press is not pressed tightly, and the cut paper is skewed.
6, the knife edge is defective, the paper cut has knife marks.
The blade of the paper cutter directly affects the work efficiency, so once the blade is paused, it will have a great impact on the work, so we need to analyze the blade life and what factors are related.
First, the material of the blade must pass the level. The knife is made of high-temperature insert welding of the blade and the body. The blade is made of high-hardness chromium-tungsten-manganese steel and the blade is made of low-carbon steel. The durability of the tool is directly proportional to the hardness of the blade. Secondly, the quality of the sharpening knife, the higher the quality of the sharpening knife, the longer the service life of the cutter, and the better the cutting quality. Finally, whether the blade of the paper cutter is blunt is directly related to the abrasion resistance of the material being cut. When cutting the paper, the speed at which the blade becomes blunt is related to the soft and hard texture of the paper and the amount of ash content.
The above are the main factors affecting the blade of the paper cutter. I hope everyone can learn from it.
With the development of modern technology, the new paper cutter has replaced the old paper cutter. But many people are not clear about the difference between the two, so let Xiaobian analyze it for everyone.
New paper cutter
1. It has the characteristics of high accuracy, and the positioning accuracy is 0.01mm.
2. High efficiency, computer-controlled positioner automatically advances, retreats and high-precision positioning, the efficiency is doubled.
3. Low labor intensity, can complete all operations at once, without having to move back and forth due to positioning difficulties.
4. Chinese operation keyboard, easy to learn, simple and easy to understand.
5. The transformation cost is low, and the performance price of the program control system is very high, which can save you valuables.
6. Smart computer program control system with teaching programming, so that you do not need to learn programming, as long as you operate in the past, the computer will record your operations and automatically generate work programs.
These six points are the advantages brought by the new paper cutter.
Computer paper cutter is an indispensable weapon in the office family world, which can save time and effort and can be kept secret. The working principle of the paper cutter is relatively simple, it is the core accessory is the paper cutter blade.
There are many other nicknames for computer paper cutter blades: full sheet paper cutter, paper cross-cutting blade, paper cutter blade, paper cross-cutting blade, paper cutting blade and so on. Computer paper cutter blades are distinguished according to the process, and there are full-rigid paper cutter, inlaid rigid paper cutter, inlaid alloy paper cutter, and high-speed steel paper cutter.
The material of the paper cutter is also divided into two types. One is the alloy steel paper cutter blade, which is resistant to chipping and has a long service life that can be used for general cutting. The other is a high-speed steel paper cutter blade. This blade has a five-fold increase in the life of one sharpening to adapt to various papers. It is really a family of paper cutter knives.
The daily use of the paper cutter should pay attention to:
1. Avoid using in humid or dusty environments.
2. It is forbidden to cut any high hardness and metal materials, so as not to break the knife edge.
3. Adjust the pressure of the cutter if the cut is uneven.
4. After the knife edge is blunt, it can be used and ground.
5. For cutting soft paper patterns, it can be sandwiched between two sheets of interlining paper, and the interlining paper is cut in the middle of the paper.
With the development of science and technology, continuous technological advancement, and the widespread application of office space, the types of paper cutters are also increasing, mainly divided into program-controlled paper cutters, automatic paper cutters, and dual hydraulic program-controlled paper cutters Machines and other machines. However, for the buyer to choose a paper cutter, the price should be selected, and the performance used is good. It is the ultimate purpose of the buyer to provide certain work efficiency and good service quality for the industry. Today, paper cutter manufacturers are making paper cutters, both in terms of technology and material selection. They are carefully designed according to national production standards, and each has its own unique advantages. How to choose a paper cutter? The following suggestions are given for reference only. Finally, you should carefully consider buying.
First of all, what you see is the outline structure of the program-controlled paper cutter. Don't be too cumbersome, it's better to be simple and generous. The second is to pay attention to the safety of machinery and equipment, there must be a certain guarantee in quality and brand reputation. Therefore, the paper cutter is also a four-level dangerous machine with a very high danger factor, so quality and safety are very important. Then it is necessary to understand the specific work efficiency value and cutting accuracy of the paper cutter itself.