After unremitting efforts, the level of domestic paper cutters and foreign products is rapidly shrinking. Old-fashioned paper cutters are constantly being replaced by multifunctional, fully automatic and other high-tech computer paper cutters. But even for high-tech products, failures are inevitable. Next Xiaobian takes everyone to understand the common failures of the band saw computer paper cutter in daily life.
        1. When the clutch clearance is too large or the friction plate is worn, the blade does not return to the highest point after cutting.
        2. When the blade edge is worn and the load is too large, the safety bolt will break.
        3. The hydraulic oil concentration is too high, and the pressure of the press is insufficient.
        4. If the blade is not adjusted to the horizontal position or the blade is not flat, the paper cannot be cut completely.
        5. The paper is not pushed against the pusher, the press is not pressed tightly, and the cut paper is skewed.

        6, the knife edge is defective, the paper cut has knife marks.