After long-term work of the program-controlled paper cutter, some normal wear and tear will occur on the mechanical part. These wear and tear will cause the size displayed on the screen to be different from the actual cut size. To solve this problem, we need to enter the "setting mode" to modify the relevant parameters of the machine.
        So how to enter the setting mode and modify the parameters?

        Start up first, and then follow the on-screen instructions to complete the initialization of the machine. After the initialization is completed, do not move the pusher, and directly measure the distance between the cutter and the pusher. Find the "function key" on the machine and click it, then select "setting mode", then enter the password to successfully enter "setting mode". At this time, three choices are displayed on the machine. We need to select the "Set Machine Reference" option. Enter the value of the distance measured between the cutter and the pusher into the "New Reference" and press "OK" to confirm the input. . Then press the "function key" to exit the "set machine reference" screen. Finally shut down and restart, and the modification is complete.