Paper tube machines have become very common and brought many conveniences for everyone. When operating paper tube machines, we must be careful and careful to avoid the problems of paper tube machinery and equipment, and at the same time, we can better serve the enterprise. Here is a brief introduction for everyone.
         Before using the paper tube machine, you should check the condition of the paper tube equipment, whether the electrical equipment and switches are good, whether the electrical circuits are insulated, whether the screws and nuts are tightened, whether the protective devices are safe, and lubricating oil is added at each refueling point. Open the car for 1-2 minutes and operate it only after the equipment is normal.
        When using a paper tube machine, do not allow your hand to enter the rotating mandrel to prevent crushing; when grinding, prevent the trousers from being caught in the paper loading shaft; pay attention to the abrasive cloth wheel when adjusting the machine tool of the tube winding machine. When the set length is reached, a slitting signal is issued without stopping, and the paper tube machine is dynamically slitting during the material movement.
        There are many things to pay attention to in the process of paper tube machine. How to operate the paper tube machine correctly and how to process the raw materials correctly? All of these need to be treated carefully to help improve the production efficiency.
        Paper tube machine performs dynamic slitting processing during material movement. The most important performance index of fixed-length slitting is the slitting accuracy, and the consistency of the finished length is better. Careful and careful operation of the paper tube machine can not only avoid the problems of paper tube machinery and equipment, but also better serve the enterprise.

        Paper tube machinery and equipment are used to manufacture paper tubes. The paper tube manufacturing equipment is fully automatic. The paper tube machinery and equipment are fully automatic in cutting and dropping the paper tube. Because paper tube machinery has so many advantages, it has been applied in many and many industries.
        Paper tube machinery and equipment will automatically stop working to avoid more serious accidents. A common problem when paper tube machinery and equipment are used to produce paper tubes is that the paper is out of paper. Paper tube machinery and equipment are performing paper tube alignment. When cutting, the speed will be changed automatically and the corresponding response action will be made automatically.
        The overall performance of paper tube machinery and equipment is still very good. The high carbon steel knife and polyester rubber knife used in paper tube machinery and equipment are very durable and stable. The paper tube machinery and equipment also have the function of automatic gluing. It is possible that the continuous knife phenomenon of paper tube machinery and equipment is because the limit switch cannot be controlled. Once this situation occurs, it is very easy to cause the buttons of the paper tube machinery and equipment to be unusable. Very easy to get an electric shock.
        Common types of friction and loosening of paper tube machine parts are spring washers, double nuts, oval-shaped self-locking nuts, and cross-cut nuts.
        Spring washers rely on the elastic reaction force generated by tightening the nut to flatten the washer to maintain a certain additional friction between the thread pairs. At the same time, the sharp edges of the washer cutouts against the nut and the supporting surface of the coupled part also prevent loosening effect. This method is simple in structure and easy to use. The disadvantage is that the load is shifted to one side, and it is not reliable to work under shock vibration. It is generally used for less important connections.

Paper cutting tube machine is widely used in printing, packaging, leather, household, hardware and other industries. It is especially suitable for plastic or paper tubes used in labels, non-woven fabrics, films, tapes, etc. The surface of the cut paper tube is smooth and flat, no flanging, no lint, and can also cut paper tubes of different inner diameters, and can be adjusted according to your desired length within the effective range.
Safety precautions for paper tube cutter
Before operating the machine, please read the instruction manual carefully and pay special attention to the following safety precautions
1. The cuffs of work clothes should be fastened.
2. It is strictly forbidden to put your head and hands into the rotating part of the paper cutting machine.
3. Do not wear gloves during operation.
4. The surrounding environment of the paper cutting machine should be clean, tidy, and the light is suitable. No other sundries should be placed nearby to avoid inconvenience to the operator.
5. The product equipment, especially the rotary part of the paper cutting machine, cannot place everything such as workpieces, tools, etc.
6. The power must be cut off before maintenance.

        When the paper tube machine is turned on, turn on the vacuum pump to verify the vacuum pressure, and turn on the air compressor to check the pressure of each part. After confirming that it is normal, switch on the air exhaust device of the edger and run the air. Turn on the rubber pump to check whether the amount of glue is normal. After all of them are determined to be normal, manual operation should be performed first to check whether each operating part is normal. If there is a fault, the fault should be eliminated first, and the operation can be carried out using semi-automatic operation after it is determined to be correct.
        The paper tube machine should check whether the cleanliness of the equipment and its working environment meets the working requirements. When we receive a new paper tube machine, we should unpack it for closer inspection. After disassembling the outer packaging, please pay attention to check it again, and then make sure that there is no problem before cleaning. We first clean up the anti-rust agent coated on the surface of the equipment and the internal debris such as iron filings, rust, and dust accumulated during transportation.

        At present, the beverage industry's degree of attention to aseptic cold filling production lines has reached a new level, and the use of aseptic cold filling equipment by beverage production enterprises has become an inevitable trend.
        The investment cost of aseptic cold filling production line has always been the concern of the beverage industry. As equipment suppliers continue to reduce equipment costs, the investment cost of paper tube machinery and equipment for aseptic cold filling production lines has been reduced to that of hot filling lines. 1.5 to 1.6 times, and the suppliers of aseptic cold filling production lines for paper tube machinery and equipment have also matured.
        Filling paper tube machinery and equipment are the core equipment on the production line. Whether the filling equipment can be quickly converted has attracted widespread attention from enterprises, because when producing different products or different bottle types, the filling equipment will be converted due to the paper tube machinery and equipment. The precious filling time is lost and production efficiency is reduced.
        The main material of paper tube machines is metal materials. Recently, it has been said that the price of steel pipes has a downward trend. Will the price of paper tube machines also decrease?
        In fact, this is a bit far-fetched. First of all, the price of steel has fallen, but when we went to the market, in fact, the price was not as exaggerated as the news said, and it still did not drop much. The second is that the metal used by the slitter itself is not a lot. If it is calculated, the cost of a single slitter is indispensable.