When using paper tube machine equipment, I believe that users' friends will also encounter some problems. When the equipment fails, it will definitely have some negative effects on our production work, so how should we solve these problems?
        1. The spiral of the paper tube is uneven. This situation can be considered from three aspects: it may be that the cutting blade of the paper tube machine equipment has too much resistance to the paper tube; when the lubricant is applied, the first layer of lubricant is not uniformly applied; the equipment Insufficient belt tension, etc.
        2. The surface of the produced paper tube product is not flat enough. The reason why such a problem occurs is probably due to the asymmetric winding angle of the two belts of the paper tube machine equipment, which causes the belt to unilaterally press the paper tube during the operation of the equipment. Adjust the handwheel appropriately.
        3. The distribution of paper tube adhesive is uneven. It is possible that the blades and paper strips of the paper tube machine equipment did not form a right angle; the blades used by the equipment were not clean enough and there was debris stuck on them, which caused uneven coating. In this case, the angle of the scraper and the paper tape should be adjusted appropriately, and the scraper should be cleaned in time.
        4, the amount of adhesive coating is unreasonable. Whether it is too much or too little, it will bring adverse effects. In view of this situation, it is necessary to appropriately adjust the blade angle of the scraper in accordance with the actual situation, so that the paper tube machine equipment can maintain a normal state.
        The automatic paper tube machine has an intelligent paper tube machine with a self-locking function. After the angle of the swing arm is adjusted, it can be automatically locked without shaking. With automatic cutting device, the cut is neat and without warping, and the length of the cutting camp is adjustable.