1. The verticality of the cut paper is inaccurate: This kind of problem is usually caused by the inaccuracy of the verticality between the table and the cutter. Just adjust the verticality of the table and the cutter again. But be sure to stop the paper cutter before power off.
2. The cut paper is skewed: At this time, only the adjustment screw of the paper cutter needs to be corrected.
3. Inaccurate cutting specifications: When the paper to be cut is placed, the paper may be uneven or the surface may be raised due to various reasons. In this case, the paper will appear cut. Inaccurate cutting specifications will cause great problems for subsequent paper applications. At present, the more advanced paper cutters generally place a pressing tool in the storage of the paper to be cut to ensure the flatness of the paper. If there is no relevant tool, the operator can manually push the paper and then enter the paper cutter to cut it.
In November 2001, China officially joined the World Trade Organization (WTO). This means that China's product import and export capabilities have grown tremendously, but at the same time it has brought huge competition and challenges to various domestic industries. In this big wave, various industries struggle, compete, rise, and fall in the market. And how are these reflected in the paper cutter manufacturers?
From a network point of view, nothing can be summarized as the restrictions on imports and exports have become smaller, the costs of imports and exports have been realized, and market competition has intensified.
In the past, domestic paper cutter manufacturers were nothing more than developing in such a large circle on the mainland. Their respective production and sales were competing with domestic rivals. The rivals in terms of technology and industry were not much different. With the arrival of the WTO, various foreign paper cutter manufacturers' products have entered the domestic market one after another, which has caused a certain impact on domestic paper cutter manufacturers. In this case, as long as the long-term paper cutter manufacturers will unite to do innovation, research and development, and service. Because it is foreseeable that if there is no development in the market competition, it is equivalent to lagging behind.
When the paper cutter cuts the paper, the blade can be said to be one of the more important parts. And when the blade is newly installed on the paper cutter, there will be some unsatisfactory situations, which requires an experienced operator to determine whether to perform maintenance.
Generally, the normal paper cutter should be used in a humid or dusty environment, not only to prevent the cutter from rusting, but also to prevent the overall performance of the cutter from being affected. Secondly, lubricating oil should be regularly added to the moving part of the cutter. If the operation of the paper cutter is stopped, the blade should be protected against rust, such as applying an appropriate amount of anti-rust oil.
Generally, the new blade of the paper cutter is used after being sharpened, and the newly installed blade sometimes has uneven cutting. In fact, this situation is normal, because there is still a small amount of iron filings on the sharpened blade, which usually disappears automatically after the paper cutter runs for a period of time.
Although the program-controlled paper cutter has a name for cutting paper, the cutting objects faced in the application are diverse. In addition to regular paper, there may be contact with leather, wood, and even plastic. And many program-controlled paper cutter users use the same cutting angle and cutting aspect when facing different materials, which makes the cutting quality of the program-controlled paper cutter unable to play well and affects The quality of the cut product.
For the blade angle of the program-controlled paper cutter, it is a more important part of the cutting method. A good program-controlled paper cutter needs a good method to get good cutting results. Many users use a cutting method and blade angle for a variety of different materials. Not only can't they get a good cutting effect, but also it may bring a certain degree to the cutter and the cutter Damage can be said to be worthless.
When cutting machine manufacturers design their products, the first consideration is the convenience of using the produced cutting machine.
The user's requirements for the paper cutter are generally simple to operate, and the requirements for the use environment should not be too high. Therefore, when designing a paper cutting machine manufacturer, the paper cutting machine manufacturer must first consider that the general user is lower than the power source when using the paper cutting machine, that is, the power under normal office environment can start the paper cutting machine to work.
In operation, the paper cutter manufacturer should also consider the convenience of operation and the friendliness of human-computer interaction. Generally produced paper cutters need to have certain automation functions. When the paper is input, the machine needs to start cutting by itself, or only one or two buttons can be started to work, of course, the latter is considered from the aspect of safety performance. The second is whether the machine has a relevant detection function after the paper cutting is completed, which can make the paper cutter stop automatically to ensure the efficiency of the next paper cutting and the safety of this paper cutting. These functions need to be considered and implemented by the cutter manufacturer at the beginning of design.