The program-controlled paper cutter itself is used for cutting paper, so the effect and durability of the cutter are the key to this machine. If the tool is not sharp enough, it will likely affect the cutting effect and cutting effect, and the wear will be too fast, affecting the service life. The effect of general tools depends on the following aspects.
         The first is the material of the program-controlled cutter. The primary criterion in the selection of materials is hardness. Generally, steel alloys are selected. After casting, certain hardness can be used to achieve the ideal hardness and use effect.
         Followed by sanding. Whether it is an industrial tool, a household tool, or a war tool, sharpness is essential. The grinding process greatly affects the sharpness of the tool. Of course, sharpness is a bit, but if it is too sharp, it may cause the blade to be too thin and affect durability. The quality of this aspect mainly depends on manual control. A skilled and experienced worker can polish the blade of a suitable program-controlled paper cutter.

The safety issue that should be paid attention to when using the paper cutter is something that everyone in the paper industry can not ignore.
Generally, there are several aspects that affect the safe use of the paper cutter:
1. Brake device. In order to save costs, many manufacturers use the upper and lower limit sensors to cut off the power supply of the cutter. Using this method, if the power is suddenly cut off, it is very likely to cause a very dangerous situation like "sliding knife". Therefore, in order to prevent this from happening, it is best to use a motor with a mechanical brake device. In most cases of failure, the motor is locked to prevent accidents.
2. In the course of daily work, the paper cutter is generally equipped with two workers to operate, which generally requires the paper cutter to be equipped with two front and rear safety covers. When the safety cover is open, the motor will not move again, ensuring the safety of the operator.
3. When the paper cutter is not working or when the blade is to be replaced, the removed blade should not be randomly placed to avoid injury.

        At present, the domestic paper cutter industry is developing very fast. From the perspective of performance and technology, it is not much different from some imported paper cutters. Various types of paper cutter manufacturers actively use new technologies and management methods to make the entire industry flourish.
        From the practical point of view, paper cutter products produced by paper cutter manufacturers at home and abroad can package normal paper cutting, and the speed and efficiency can reach a certain standard. Therefore, there is not much difference in the important technology of domestic and foreign paper cutter manufacturers, and the pass rate can be guaranteed. From the perspective of accuracy, most of the domestic and foreign paper cutter manufacturers have chosen the turbine transmission method, so in this regard, domestic paper cutter manufacturers are also keeping up with the international pace and will not fall behind.
        However, domestic paper cutters have a clear advantage over foreign ones. Domestic paper cutter manufacturers have launched various personalized designs for users, which are generally better than foreign paper cutter manufacturers. Moreover, the price of foreign paper cutter equipment is generally more expensive than domestic.

        Features of small office paper cutter:
        1. The cut surface meets the current demand for most office paper;
        2. The overall paper cutter is small in size, convenient to use, and does not occupy too much office space;
        3. It can work for a long time and cut a lot of paper;
        4. High cutting accuracy.
        Use of small office paper cutter:
        1.Selection of cutting blade angle
        In the work of the paper cutter, the selection of the cutting angle of the blade is very important. A good paper cutter needs a good paper cutter. And because many users do not understand this industry, they may ignore this aspect when using or buying. As a result, the cutting accuracy is not high when it is used in the later stage, and even severely, the cutter may become loose, causing certain danger.
        2. Problems in the cutting of various materials
        With the development of modern office, the materials carried by various materials are not limited to ordinary paper. And some companies use paper such as carbon-free paper or even aluminum as the data carrier. When these papers are cut with a paper cutter, the paper cutter may be damaged. Therefore, when using the paper cutter, the purpose of the paper cutter should be clarified.

1. When the program-controlled paper cutter is turned on, mechanical inspection should be carried out and safety inspections done, such as daily cleaning and refueling of oil holes.
2. After doing the above measures, after checking the photoelectric measures of the program-controlled paper cutter, multiple operations should be performed to observe whether it is normal. If any abnormality is found, it should be eliminated immediately.
3. When operating the program-controlled paper cutter, you should work with all your heart and mind, and do not do anything unrelated to your job, to avoid distraction and increase the risk factor. Of course, two people are also prohibited from operating the program-controlled paper cutter at the same time.
4. During the operation of the program-controlled paper cutter, do not put your hand into the machine. If you find that the fault cannot be corrected by hand, you must stop the machine first.
5. Do not perform ultra-high operations when cutting paper with a program-controlled paper cutter to avoid accidents or operating loads.
6. When replacing the cutter of the program-controlled paper cutter, the machine must first be stopped before it can be replaced.
7. Regarding the maintenance of the program-controlled paper cutter, it is enough to refuel and clean up the oil holes.