In the program-controlled paper cutter, every time we install a new blade or sharpen the old blade, we need to manually adjust the height of its knife to adjust the cutting amount of its blade, which can effectively avoid Accidents such as cutting too deep due to large blade heights occur. First of all, we must pay attention to making sure that its motor is turned off when adjusting its blades, as long as it is completely stopped . So what are the steps in the adjustment of the program-controlled paper cutter, let's briefly introduce it to everyone below.
        First, we need to make sure that the cutter is in the tool change state, that is, stop the operation of its main motor, press the stop button of its main motor, and ensure that it is in a stationary state before changing its tool selection switch in the middle. Knife position.
        Next, we need to determine the cutting depth of the blade. At this time, we can use a socket wrench to rotate the nut on the end face of the pulley so that the knife can move to a certain lowest point. At the same time, we must observe the depth of its blade. Whether it is reasonable or not is generally a depth of 0.5 to 1 mm.
        Regarding the blade adjustment process, if only one end of the blade and the blade can be contacted, we can solve it by adjusting the eccentric shaft on the rear of the main frame; when the blade cannot cut the paper normally due to wear, we can Move the blade down in the direction of its long hole until it can completely cut the paper.

        Comparison of CNC, Digital Display and Program-controlled Paper Cutter
        At present, in terms of paper cutters, many forms have appeared in the market, such as computer paper cutters, but in terms of CNC, digital display, and program-controlled paper cutters, many people do not know very well, or It's easy to confuse them with each other, so before comparing them, we must first introduce their respective concepts.
        For the program-controlled paper cutter, it uses a single-chip computer or EDA technology as its tool. The computer can automatically complete the logic compilation, simplification, segmentation, synthesis, optimization, layout, wiring, and simulation. A paper cutter with automatic control of the operation process.
        The numerical control technology refers to a technology that uses a number of instructions composed of numbers, characters and symbols to control the movement of multiple mechanical devices. Generally, it uses some general-purpose or special-purpose computers to control the numbers. Program control. The digital display indicates a way to display the test results of temperature, humidity, quality, etc. in digital form.

        Paper cutting machinery is the soul of the paper industry, and the paper industry occupies an important position in the entire national economy. Paper cutters have gone through several changing stages from mechanical paper cutters to hydraulic, digital display, microcomputer program-controlled, cutting production lines, and other technologies.
         With the technological progress of the printing industry, the speed of printing presses is getting faster and faster, and higher efficiency and higher quality requirements are put on the paper cutter. The computer program-controlled paper cutting machine adopts a signal memory storage device or a microprocessor to store instruction programs. The advance, backward and positioning of the paper pushing machine are automatically completed by the computer, and different cutting programs can be written according to different cutting requirements. It can be stored for a long time and can be called at any time when needed. The cutting precision, speed and efficiency of the paper cutter have been greatly improved.

         Program-controlled paper cutting machine controls the cutter through the operation of hydraulic oil. It can cut some soft paper, such as rice paper, leather and other texts. It has a wide range of applications. All are equipped. So, how to choose a program-controlled paper cutter correctly?
         First of all, it is necessary to understand what types of paper cutters are currently on the market, and then determine the required program-controlled paper cutters.
         For example, in a slightly larger enterprise, a computer-controlled paper cutter should be selected, so that it can better cooperate with digital for printing, the main reason is that it can store data for the next call. The paper cutter with oblique knife cutting technology can make the cut paper more flat and more accurate, so you don't need to worry about whether the paper is too thick. In addition, the paper cutter should have the characteristics of accurate and large-format paper cutting, and the humanized design of recording data is better.

        Paper cutter, as its name implies, is a device used to handle paper cutting. From the original mechanical paper cutter to today's intelligent control paper cutter, the cutting time of the paper cutter is gradually shorter, the cutting accuracy is higher, and the work efficiency is improved. Compared with other devices, this type of equipment is easy to operate and does not place high demands on the surrounding environment. It can ensure the normal operation of the power supply.
        Today we will talk about small office paper cutters in paper cutter product types. As long as this kind of small program-controlled paper cutter is suitable for trimming the paper before binding the documents. Due to the continuous improvement of technology, the performance of this type of small paper cutter is also gradually improved, which not only improves the cutting accuracy and stability, but also improves the safety performance of the two-handed differential protection and radio and television protection. So perfect. Of course, this type of small paper cutter has its own characteristics. The cutting format is generally between 430mm-800mm. It is small, convenient and easy to use, and does not take up much space. It can cut a large number of cutting objects, and the cutting accuracy of the cutting objects is high.