Features of small office paper cutter:
1. The cut surface meets the current demand for most office paper;
2. The overall paper cutter is small in size, convenient to use, and does not occupy too much office space;
3. It can work for a long time and cut a lot of paper;
4. High cutting accuracy.
Use of small office paper cutter:
1.Selection of cutting blade angle
In the work of the paper cutter, the selection of the cutting angle of the blade is very important. A good paper cutter needs a good paper cutter. And because many users do not understand this industry, they may ignore this aspect when using or buying. As a result, the cutting accuracy is not high when it is used in the later stage, and even severely, the cutter may become loose, causing certain danger.
2. Problems in the cutting of various materials
With the development of modern office, the materials carried by various materials are not limited to ordinary paper. And some companies use paper such as carbon-free paper or even aluminum as the data carrier. When these papers are cut with a paper cutter, the paper cutter may be damaged. Therefore, when using the paper cutter, the purpose of the paper cutter should be clarified.
1. When the program-controlled paper cutter is turned on, mechanical inspection should be carried out and safety inspections done, such as daily cleaning and refueling of oil holes.
2. After doing the above measures, after checking the photoelectric measures of the program-controlled paper cutter, multiple operations should be performed to observe whether it is normal. If any abnormality is found, it should be eliminated immediately.
3. When operating the program-controlled paper cutter, you should work with all your heart and mind, and do not do anything unrelated to your job, to avoid distraction and increase the risk factor. Of course, two people are also prohibited from operating the program-controlled paper cutter at the same time.
4. During the operation of the program-controlled paper cutter, do not put your hand into the machine. If you find that the fault cannot be corrected by hand, you must stop the machine first.
5. Do not perform ultra-high operations when cutting paper with a program-controlled paper cutter to avoid accidents or operating loads.
6. When replacing the cutter of the program-controlled paper cutter, the machine must first be stopped before it can be replaced.
7. Regarding the maintenance of the program-controlled paper cutter, it is enough to refuel and clean up the oil holes.
With the increase in the amount of paper used by various enterprises and the increase in confidentiality requirements, paper cutters have become one of the industrial equipment required by various enterprises. At present, there are many paper cutting machine manufacturers on the market. The quality of the paper cutting machines produced is not uniform. Many customers are disappointed with the paper cutting machine manufacturers because they have purchased a paper cutting machine with poor quality. So, what should a paper cutter manufacturer do to make a good paper cutter?
First, in terms of accuracy. The cutting effect of the equipment produced by the paper cutter manufacturer should be the same as that of most paper production enterprises. According to the requirements of different paper types, the cutting speed and quality must be clearly controlled.
Followed by quality. The quality here is not the quality of the cut paper, but the quality of the paper cutter itself. Paper cutter manufacturers should strictly control the material, technology, production process and other aspects when producing equipment, so that they can produce high-quality paper cutters and win the trust of the market and customers.
In modern industrial production, energy conservation and environmental protection have always been inevitable topics. As one of the more important automated machinery and equipment in industrial production, the program-controlled paper cutter is also actively developing in this direction. The development of energy-saving technology for program-controlled paper cutters is very advantageous for cost savings under the premise that industrial electricity is currently expensive.
At present, the energy-saving technology development of the program-controlled paper cutter is relatively mature, and the energy-saving effect is also very obvious. In terms of production reliability, it is not inferior to other types of paper cutters, so it is welcomed by consumers.
After a series of tests, the energy-saving program-controlled paper cutter can save about 30% in electrical energy compared to ordinary program-controlled paper cutters. There may not be a big difference for personal use, but if it is a relatively large enterprise or paper manufacturer, it will be a considerable cost for them.
At this stage, the market is still very profitable for the paper cutter industry, but some manufacturers are still unsatisfied with this part. The price of the equipment has been tried to increase, but its service and quality have not. Corresponding promotion. For consumers, such a market is very harmful. Moreover, for some counterfeit and inferior paper cutter manufacturers, they even make some very poor quality cutters and sell them under the brand name, which is a very harmful phenomenon for the entire paper cutter market.
Paper cutting machine still belongs to a new type of industry in China. The first thing to do on the road of development is to be pragmatic. A regular paper cutter manufacturer should not only focus on products, but also focus on the entire market, strengthen self-consciousness of rights protection, and strengthen social responsibility. Profit is certainly the lifeblood of an enterprise, but for speculative actions that are harmful to consumers and the market, it should still be resolutely resisted, so as to benefit the long-term development of the paper cutter industry.