The use and characteristics of food paper bag machine
Paper bag machine use: Fold the web, form, cut the bag, glue, fold the bottom, paste the bottom, and finish the finished bag. It is the production of shopping bags, garment bags, snack food bags, bread bags, vomit bags, dried fruits. Ideal for environmentally friendly paper bags such as bags.
Paper bag machine features:
1. Applicable paper 30-100g
2. The length of the bag can be arbitrarily set within a certain range of the touch screen man-machine interface.
3.PLC programmable servo control system
4. Accurate color tracking system
5. Color mark error automatic alarm stop
Automatic lubrication oil supply system

Since it is possible to take advantage of the film-based version, which is the plate making method adopted by most carton printing companies, it is natural to see that the price of the film material is expensive, and that it will be used in the product of the carton product with a large area for the width of the product. In terms of, therefore, it is necessary to be able to make the cost of the product quite considerable. And to be able to see that the plate-making error rate is high due to the operator's unskilled or unsatisfactory operating technique, the natural is to make it and the quality of the reprinting due to the paper plate machine quality is not stable enough. Problems such as poor stability, so it is necessary to be able to see that these are subject to further improvement and improvement. At the same time, we must be able to carefully weigh the pros and cons in the production adaptability and technical capabilities according to the factory's production scale, so we must know that we can guarantee that the product is to help us to do it. Moderate development of the plate making process suitable for the actual situation of the factory, naturally it is necessary to be able to see it, so it is not familiar with the imposition software and plate making equipment, seeing that it can be used because the computer configuration and the file format do not match; The conversion of the files that need to be rotated is ignored; therefore, we are not aware of the printing process and the post-press process. Here we have to know that we should also be familiar with the connection and use of the computer and other special equipment outside, so we must see that in the product, it is better to distinguish it is the better use of the product. This has the basic ability to manage file output and shoot. It can be used to make it more perfect.

        We have to see that in some SMEs, due to financial problems, equipment cannot be updated in time. In this case, the price of raw materials has skyrocketed. Naturally, it is necessary to make its production profits lower and lower, and at the same time, to target market changes. Can make it more difficult to survive. Also see that from another perspective, we will see that this shows that packaging technology is maturing. Naturally, we must see from the perspective of China's domestic packaging market that we can see that China is a packaging power, so we must make significant progress in terms of system and all aspects.
        Secondly, the professionals pointed out that there are two main problems in the printing and packaging industry of paper bag machines in China. This has greatly affected our use. First of all, in the entire news industry chain, we will be low in the printing and packaging industry, followed by the SMEs, which will make them competitive in the industry, and also one has to see the operating rate bias. Low condition to survive. At the same time, we must see that this kind of industrial chain is not balanced. At the same time, it is very difficult for us to consider the sustainable and healthy development of the printing and packaging industry. Therefore, there is only a reform system under this circumstance.

In the process of bag making, the plastic bag making machine has different lengths of finished plastic bags, sometimes long and sometimes short. If this is the case, then it will definitely not work, but how can we solve this situation? What is the cause of this phenomenon? The following is a detailed analysis by Xiaobian and everyone.
1. There is a lot of dust on the photoelectric head of the plastic bag making machine. When the dust on the photoelectric controller is too much, it will affect the luminosity and intensity of the laser, so that the length of the plastic cannot be accurately controlled.
2. The problem of the photoelectric head equipment of the plastic bag making machine. Because some manufacturers' bag making machine quality can not be guaranteed, the use of inferior photoelectric head accessories, resulting in sensitive substandard, the solution is to replace the photoelectric head.
3. The speed of the plastic bag making machine is too high. Make some accessories can not be more rhythm, you should reduce the speed to test.
4. The process of longitudinally sealing the knife to roll the cloth. Increased feed pressure.
5. The feeding and pressing devices of the plastic bag making machine are not synchronized. The feeding is too fast, too slow or too tight, and the pressing device is too loose. This phenomenon occurs when the length of the plastic bag is different.

With the development of technology and people's requirements for the environment is getting higher and higher. More and more people are paying attention to environmental protection. Today's paper products are becoming more and more popular, and there are more and more paper cups, paper bags and paper products. More people are coming to the paper bag business. But how to buy a cheap paper bag machine?
There are several factors to note:
1. Select the product of the paper bag machine you want;
2. View classification (paper bag machine includes food paper bag machine, medical paper bag machine, paper rope machine, hand-held machine, etc.);
3. View system parameters. The character does not meet the specifications of the product you want to make (from the parameter 1 paper specification finished product 2 paper bag parameters 3 equipment basic parameters) and so on;
4. The most important thing is to see if it is fully automatic or semi-automatic and the operation at the time of production;