Since it is possible to take advantage of the film-based version, which is the plate making method adopted by most carton printing companies, it is natural to see that the price of the film material is expensive, and that it will be used in the product of the carton product with a large area for the width of the product. In terms of, therefore, it is necessary to be able to make the cost of the product quite considerable. And to be able to see that the plate-making error rate is high due to the operator's unskilled or unsatisfactory operating technique, the natural is to make it and the quality of the reprinting due to the paper plate machine quality is not stable enough. Problems such as poor stability, so it is necessary to be able to see that these are subject to further improvement and improvement. At the same time, we must be able to carefully weigh the pros and cons in the production adaptability and technical capabilities according to the factory's production scale, so we must know that we can guarantee that the product is to help us to do it. Moderate development of the plate making process suitable for the actual situation of the factory, naturally it is necessary to be able to see it, so it is not familiar with the imposition software and plate making equipment, seeing that it can be used because the computer configuration and the file format do not match; The conversion of the files that need to be rotated is ignored; therefore, we are not aware of the printing process and the post-press process. Here we have to know that we should also be familiar with the connection and use of the computer and other special equipment outside, so we must see that in the product, it is better to distinguish it is the better use of the product. This has the basic ability to manage file output and shoot. It can be used to make it more perfect.