Introduction to the installation and use adjustment of the paper computer slitter. After unpacking the machine, you should check the integrity of the machine and check whether there is damage during transportation. After checking the damage, you can install the calibration level on a flat and solid basis. , Check whether the parts are intact and intact, whether the connecting bolts are tightened reliably, and whether the moving parts are flexible. Then fill the lubricating parts with the corresponding lubricating oil. After checking the refueling, confirm that they can be turned on before reading. The attached manual. Run slowly at first when starting. After everything is normal, slowly increase the cutting speed until it reaches normal.

        The computer high-speed cutting machine is a kind of equipment that keeps improving in the process of advanced use. It is the same in different environments and has a high adaptability and application effect. With the economic progress, it will be widely used in various fields in the future. The traction drive adopts vector frequency conversion motor to achieve constant linear speed control. It is also very safe in terms of convenience of use. Among them, the horizontal automatic cutting machine and the medium speed cutting machine are also safe and convenient. Meet practical applications in various industries.
        The computer high-speed slitting machine adopts a shaftless cylinder top sleeve device, which is electrically controlled by the screw clamp. It is very easy to control during operation. The entire system configuration is the most advanced and the speed in use The above is also the same with uniform effect, which will be maximized in terms of personal safety and application. This machine is a slitting machine for slitting and processing common packaging materials such as composite film, monomer film, aluminum foil, paper and so on. It will bring maximum use in the future production process, and it can also meet the application in actual operation.

        Commonly used in printing and packaging machinery. In the past, the speed of the magnetic powder clutch of the slitting machine could not be high. The slitting machine is a mechanical device that slits wide-width paper or film into multiple narrow-width materials. Because it is easy to cause high-speed friction of magnetic powder during operation, it will cause high temperature and shorten its life. In severe cases, it will be stuck, which will hinder the operation of the machine and bring very serious consequences to production. Seriously affected the production efficiency. After the work is completed, clean up the dust and paper dust on the equipment in time, check the cutters and grinding wheels, drain the water in the oil water leveler and the gas storage tank, and check the operating parts for abnormalities.
        Then, cut off the power according to the operation requirements of the manual, and maintain the computer operating system. There are many types of this type of mechanical equipment, and there are many ways to classify them. Take the horizontal automatic slitting machine as one of them. This kind of equipment belongs to an automated equipment type, and the superiority of such automation is very effective when used. It is also a type of program control equipment with good performance, and it can be seen in many occasions.

        Film, slitter is a large roll of paper. Non-woven fabric, aluminum foil, mica tape and other thin materials are cut into small rolls of different widths before and after printing. They are often used in papermaking machinery and printing and packaging machinery. The aggressive control scheme of the slitter is to use a large motor to drive the rewinding and unwinding shaft. A magnetic powder clutch is added to the rewinding and unwinding shaft, and the resistance generated by the magnetic powder clutch current is adjusted to control the appearance of the data. Magnetic powder clutches and brakes are a special type of automated actuators that transmit torque through magnetic powder filled in the working gap.
        By changing the magnetic current, the magnetic state of the magnetic powder can be changed, thereby adjusting the transmitted torque. It can be used for stepless speed regulation from zero to synchronous speed. It is suitable for high-speed segment fine-tuning and medium and small power speed regulation systems. It is also used to adjust the torque by adjusting the current to ensure that the tension in the winding process adheres to a constant unwinding or rewinding tension control system. The current slitting machines are all fully automatic equipment types, which is more convenient when using Del, which can make the use of them more in daily operations.

        Mainly used for hardcover book shells, desktop calendars, slitter is a special equipment for cutting gray and white cardboard. Cardboard opening and slitting processes such as tags and gift boxes. It is composed of automatic paper feeding mechanism, cutting mechanism, paper receiving mechanism and automatic control system. The color casting structure of this machine is sturdy, stable in performance, high in work efficiency, low in energy consumption and wide in use. The use value of such mechanical equipment is very high, and the demand for them is actually very high. It is precisely because of the use of such mechanical equipment that it can make the paper slitting operation smoother.
        Digitally controlled high-speed cutting machine belongs to a type of highly intelligent equipment. Such equipment is a type of equipment controlled by a computer. This will reduce the burden on the human, and it can also discard the disadvantages of the artificial. . This type of equipment has many advantages when it is operated. In addition to reducing the use of labor, it can also speed up the work efficiency. There are also many characteristics of its own, their shape design style is very exquisite and unique, and it is also very convenient when operating.