The automatic laminating machine drying system adopts a special horizontal drying box design and a manual constant temperature control system (easy operation, fast heating speed, and effective saving of auxiliary time from 30 ° to 90 ° in only about 15 minutes), this design It can make OPP adhesive film run dry stably without causing offset or shrinkage of the adhesive film. It is suitable for the drying system of water-based glue. It has high heat and wide distribution, completely distributing the heat energy evenly on the OPP glue film, prompting the glue to dry quickly, and the reaction speed is fast.
Adopt advanced circuit adopts FATEK original PLC programming control, automatic laminating machine complete machine electromechanical integration control, can automatically adjust the overlapping size through the touch screen, without manual operation, reducing the error of paper overlapping. The man-machine interface displays speed, mechanical working status, and fault prompts to achieve humanized operation; the motor adopts frequency conversion control, which is stable, energy-saving, safe and reliable.
The automatic laminating machine is for laminating the surface of printed products, such as books, posters, color box packaging, handbags, etc. In response to the increasing awareness of global environmental protection, oil-based lamination will be gradually replaced by water-based lamination. The new automatic laminating machine planned by our company is accustomed to the lamination of water-based / oil-based two kinds of glue and pre-coated film, and it is a "one machine, three uses" and "high speed power saving" equipment.
The head of the automatic laminating machine adopts the feeder head to actively transport the paper system, the pressing steel rod uses the hot oil circulation heating system, the compound pressure uses the pneumatic equipment, the electrical system uses the PLC programming control, and the cutting system is equipped with a knife and Rotary flying knife slitting equipment. The rear of the laminating machine is equipped with an active paper collection system. The whole machine covers a small area, has a high degree of automation, simple operation and high stability. It is the first choice for printing and packaging professions. It can also obtain very good economic benefits together in mass production.
Laminating machine is often used in life. Laminating is to apply adhesive to the plastic film and combine it with the printed matter using paper as the substrate. After being pressed together by the rubber roller and the heating roller, the paper is formed One product.
We need to pay attention to the following aspects when laminating:
1. There are two kinds of membranes used in the laminating machine: sub-membrane and bright film. The effect of sub-membrane is like matte. Choosing different membranes has different effects, which should be freely selected according to your needs.
2. There are different types of laminating machines, including automatic laminating machines and small laminating machines.
3. The laminating machine of laminating machine is best to laminating on both sides at the same time, so that it looks smoother, has stiffness and does not curl.
What is the layout and characteristics of the laminating machine. The active paper feeder of the laminating machine, the fine depiction of the feeder feed head, enables the thick and thin paper to be sent out smoothly. The stepless variable speed equipment is selected. The laminating machine and the glazing machine are equipped with active edge control. paper. Fine wind head, it is convenient to adjust the relative position of the wind head and the paper stack during operation. The unique non-stop paper feed equipment, which is equipped with auxiliary table, can replenish the paper while feeding the paper, to ensure the production of laminating machine and glazing machine.
Powder removal equipment of the laminating machine (optional combination): two-level powder removal layout of powder sweeping and powder pressing is selected. The paper passes through the conveyor belt by the brush roller and the brush sweeping powder to make the dust on the surface sucked away by the suction fan. Rolled back by the electric heating roller, it is useful to remove the dust attached to the paper during printing; the laminating machine, the glazing machine and the conveyor belt are closely placed to depict the connection and efficient suction, so that the paper will not be dislocated or misaligned. The paper is accurately delivered to the press section of the host.
The hard chromium composite roller of the laminating machine host is equipped with an electric heating system and active temperature control equipment, so that the temperature is evenly distributed. The drawing of the enlarged composite roller increases the pressing surface: the diameter of the electric heating roller is 420mm, the inner wall of the roller core is inner circle, the laminating machine and the glazing machine make the roller without focusing and the heating surface is uniform; Ensure that the OPP film presses smoothly and works smoothly. The manual pressure hydraulic cylinder controls the compound pressure, which can balance the pressure of the left and right rollers. High-precision hard chrome plated mirror heating roller cooperates with high-performance laminating rubber roller, and the laminating machine and glazing machine complete the thermal laminating technology.
What is the use of a small laminating machine? This laminating machine is actually called a laminating machine. It is a simple and practical professional laminating machine. It can also be used as a plastic sealing machine, a cold laminating machine, and heat sealing with PVC.
In fact, this type of laminating machine is also upgraded from the internal thermoplastic sealing machine. Even so, this type of laminator solves the fundamental problem of the first type of laminator. This kind of equipment adopts the internal hot glue roller to press the film and feed the film up and down, which increases the heating time of the pre-coated film, and the heat is balanced. Therefore, the film covered is smooth, bright, and the same effect as the film covered by the high-end film laminator.
Although this kind of equipment has these advantages, there are also shortcomings because this type of laminating machine has a heating power of only 500W. Although the temperature is adjustable, the speed is fixed, and the film can be pressed 0.7-0.8 meters per minute. It is only suitable for business card film, recipe film, photo film and graphic print film, especially some small printing plants, typing copy shops, business card production companies and photo studios. In order to reduce equipment investment and reduce costs, this is the choice. There are many similar laminators.