Paper tube machines generally refer to the machinery and equipment used to produce paper tubes. The paper tubes produced are used in various industries, paper industry tubes, food packaging tubes, leather industry tubes, construction industry tubes, chemical fiber industry tubes, Film industry pipe, printing industry pipe, exhibition industry pipe, etc. There are also many types of paper tube machines. The most common paper tube machines are spiral paper tube machines and roll paper tube machines.
Paper tube machine features
1. Automatic cutting and automatic tube dropping, automatic stop function for paper shortage and paper break;
3. Automatic speed change and automatic recovery when cutting;
4. Computer PLC control with remote control port;
5, multi-point operation panel or digital remote control function, the operation is very convenient;
6.The round knife actively cuts, the cut is more stable, and the performance is more stable;
7, more than eighty function settings, arbitrarily set the machine operation;
8.Stainless steel plastic basin, polyester rubber knife, high carbon steel rubber knife. Durable;
9, automatic glue.
Application of paper tube machine in packaging industry
At present, the beverage industry's degree of attention to aseptic cold filling production lines has reached a new level, and the use of aseptic cold filling equipment by beverage production enterprises has become an inevitable trend.
The investment cost of aseptic cold filling production line has always been the concern of the beverage industry. With the continuous reduction of equipment costs by equipment suppliers, the investment cost of paper tube machines for aseptic cold filling production lines has been reduced to 1.5 of the hot filling line. ～ 1.6 times, and the supplier of domestic aseptic cold filling production line of paper tube machine has also matured continuously.
Filling equipment Paper tube machine is the most core equipment on the production line. Whether the filling equipment can be quickly converted has attracted widespread attention from enterprises. Because when producing different products or different bottle types, the filling equipment will lose valuable filling time and reduce production efficiency due to the conversion of paper tube equipment.

        The paper tube machine equipment must be responsible for it, and it is strictly forbidden to misappropriate by others. It is strictly forbidden to place workers, cards, measuring tools and other sundries in the various parts of the machine tool when the roll paper tube machine is in operation, and the staff must not leave the work place without permission. When cutting paper, if using a ventilation machine to cut paper, the height of the paper tube cutting machine cannot exceed 125 mm, and according to the size requirements, use an azimuth pressure iron to tighten it. The machine can only cut paper, not other plates. It should be operated by two or more people.
        Paper tube machine must pay attention when operating. First, adjust the tool and clamp the work before cutting. The parking baffle must be fixed, and work can only be carried out after a test run of clamping, loosening, forward and backward. Secondly, when the machine tool is rotating, no part of the human body should touch the transmission parts. Cuffs must be worn during operation, and gloves are strictly forbidden to work.

        Paper tube machines are mechanical equipment that can produce paper tubes.The paper tubes made by the paper tube mechanism have been used in many industries. Because there are many types of paper tube machines, they can effectively meet the needs of customers and the market. Requirements, the general food packaging tube, printing industry tube and other paper tube usage is very large and the price is relatively affordable.
        Paper tube machine manufacturers introduce how to clean paper tube equipment
        1. Paper tube equipment cleaning. After the equipment is unpacked, inspected and disassembled, the coated anti-rust agent and internal iron scraps, rust, and dirt accumulated during transportation and storage must be cleaned and cleaned before assembly.
        2. Paper tube equipment lubrication. After the internal and external parts of the equipment are cleaned, lubrication can be performed. Lubricants need to be tested and determined to meet the requirements before they can be used. The lubricating oil should be filtered before adding the equipment, and the added oil should reach the specified oil standard position; all lubricating parts and oil holes should be filled with lubricating oil.
       Paper tube machine manufacturers remind that before using the paper tube machine, you should check the condition of each component in detail to see if the electrical equipment switches are good, electrical circuits are insulated, screw caps are tightened, and protective devices are secure.

        In the production process of the paper tube machine, the lubrication treatment can give the advantages of the equipment very well. The steps of cleaning and lubrication, the maintenance and cleaning of the paper tube precision cutting machine can improve the performance of the equipment and reduce the occurrence of problems. Extend equipment life. So the equipment must be clean and lubricated. So how should the paper tube machine be lubricated?
        1. Mechanical cleaning of paper tube. After the equipment is unpacked for inspection and dismantling, the anti-rust agent applied and iron scraps, rust and dust accumulated during transportation and storage during storage shall be removed, and the device shall be cleaned.
        2. The paper tube is mechanically smooth. After the various parts of the equipment table are clean, it can be oiled and smooth. The smooth oil needs to pass the test, and it can only be used after it is determined to meet the requirements. The smooth oil needs to be filtered before participating in the equipment, and the oil should reach the regular oil standard orientation; some smooth and oil holes should be filled with smooth oil.
        Paper tube produced by paper tube machine is used in various industries, chemical fiber industry tube, film industry tube, printing industry tube, paper industry tube, leather industry tube, food packaging tube, construction tube, exhibition industry Use a tube and so on. There are also many types of paper tube machines. The more common paper tube machines are spiral paper tube machines and roll paper tube machines.

        The automatic paper tube machine has an intelligent paper tube machine with a self-locking function. After the angle of the swing arm is adjusted, it can be automatically locked without shaking. With automatic cutting device, the cut is neat and without warping, and the length of the cutting camp is adjustable. Analysis of common faults when using paper tube machine equipment.
        1. The spiral of the paper tube machine is uneven. This situation can be considered from three aspects: it may be that the cutting blade of the paper tube machine equipment has too much resistance to the paper tube; when the lubricant is applied, the layer of lubricant is not uniformly applied; Insufficient belt tension, etc.
        2. The distribution of paper tube adhesive is uneven. It is possible that the blades and paper strips of the paper tube machine equipment did not form a right angle; the blades used by the equipment were not clean enough and there was debris stuck on them, which caused uneven coating. In this case, the angle of the scraper and the paper tape should be adjusted appropriately, and the scraper should be cleaned in time.
        3. The amount of adhesive coating is unreasonable. Whether it is too much or too little, it will bring adverse effects. In view of this situation, it is necessary to appropriately adjust the blade angle of the scraper in accordance with the actual situation, so that the paper tube machine equipment can maintain a normal state.