The paper tube cutting machine adopts pneumatic and electric operation to cut, and its appearance is beautiful and simple. The design is perfect and the platform is moderate in height, making it easy for employees to operate. The power consumption of the drive load is small. Cutting with a flat knife, the cut is smooth and free of dust, and the length is accurate. It is widely used in textile, paper, stationery, fireworks, printing, packaging, leather and other industries. Is the most ideal cutting equipment for paper tubes. Mainly suitable for various types of paper tube cutting with short length and moderate output.
Advantages of paper tube cutting machine:
1. Simple, convenient operation and low price.
2. Pneumatic cutting.
3. Fast speed.
Before operating the paper tube cutter, please read the instruction manual carefully, and pay special attention to the following safety precautions:
1. The cuffs of work clothes should be fastened.
2. It is strictly forbidden to put your head and hands into the rotating part of the machine.
3. Do not wear gloves during operation.
4. The surrounding environment of the paper cutting machine should be clean, tidy, and the light is suitable. No other sundries should be placed nearby to avoid inconvenience to the operator.
5. No workpieces, tools, etc. can be placed on the rotating parts of the product equipment.
6. The power must be cut off before maintenance.

        A large part of the price of automatic paper tube cutting machine depends on the material used by the manufacturer when producing the automatic paper tube cutting machine. If the manufacturer uses some high-quality materials in the production process, then the entire automatic paper tube cutting machine The price of the machine is naturally higher than the price of ordinary automatic paper tube cutting machine, but the corresponding is that the automatic paper tube cutting machine produced with high-quality materials is definitely advantageous in terms of performance and stability. It is definitely higher than the automatic paper tube cutting machine produced by general materials.
        In addition to the production materials, the price of the automatic paper tube cutting machine certainly depends on the production cost of the automatic paper tube cutting machine produced by the manufacturer. The production efficiency and production process of each enterprise must be partially different, so each The production cost of the automatic paper tube cutting machine from each manufacturer is also different. The manufacturer must customize the price of the automatic paper tube cutting machine according to its own production cost. Otherwise, the price will be set blindly according to the market. The situation is different, which has a greater impact.

        What is the difference between using an automatic paper tube cutting machine and a manual paper tube cutting machine? This is a point of confusion for many people. If you do n’t know, the following is the main difference between this product.
        The automatic paper tube cutting machine is more complicated to search and more expensive due to the internal components. The manual paper tube cutting machine is purely manual, so it has fewer mechanical parts due to the reduced use of components. The amount of material will also be reduced, so manual paper tube cutters have certain advantages in weight.
        The stability is that the automatic paper tube cutting machine is stable because you only need to set the automatic paper tube cutting machine well, so that the automatic paper tube cutting machine will not show any deviation, while the manual paper tube cutting machine It's different. If you accidentally use a manual paper tube cutting machine when the hand is misaligned, the paper tube will be cut out of position and cannot be used. At present, manual paper tube cutting machines generally have a device to assist in cutting, which will not allow the user to deviate greatly.
        Although manual paper tube cutting machine may be more efficient than automatic paper tube cutting machine (whether the efficiency is determined by the person using manual paper tube cutting machine), the operation method of automatic paper tube cutting machine is still full Automatic reduction of labor Although the automatic paper tube cutting opportunity reduces some efficiency, it is easy to operate and has high stability. However, the automatic paper tube cutting machine has a fatal disadvantage is that it requires electrical energy. Without the automatic paper tube cutting machine cannot be used.

        The bearings in paper tube machinery sometimes make some abnormal noises. What is the reason? We summarized the following:
        Grease has impurities; insufficient lubrication, too low oil level, improper storage causes oil or grease to leak through the seal; paper tube machine bearings are mixed with impurities such as sand or carbon particles to act as abrasives; water, acids Dirt or paint can cause corrosion; the bearing is pinched by the seat hole, the roundness of the seat hole is not good, or the seat hole is distorted; the horn on the bottom surface of the bearing seat is uneven, causing the seat hole to deform or even the bearing seat crack.
        There are debris in the bearing seat hole of the paper tube machine, and chips and dust particles remain. The sealing ring is eccentric, and it touches adjacent parts and causes friction. Two fixed-end bearings; the fit between the bearing and the shaft is too loose, the shaft diameter is too small or the tension sleeve is not locked; the bearing clearance is too small, the paper tube machine is too tight when rotating, and the adapter sleeve is over-tightened The bearing is noisy, caused by the roller's end face or steel ball slipping; the shaft's thermal elongation is too large, the bearing is subject to the axial additional load of the fixed seat; the shaft shoulder is too large, and it encounters the bearing's seal and friction occurs.
        The shoulder of the seat hole is too large, and the seal sent by the bearing is distorted; the teeth of the lock washer are bent, and the bearing comes into contact with the friction; the position of the oil ring is not suitable, and the flange cover is brought into friction; steel Balls or rollers have pressure pits, which are caused by hammering the bearings during installation; bearings are noisy and interfere with external vibration sources; the bearings are discolored and deformed by heat; the bearings are disassembled by heating with a spray gun; the shaft is too thick and the actual fit is too tight The diameter of the bearing seat hole is too large, and the actual fit is too loose; the cage is broken; the bearing raceway is rusty, which are all the reasons that can cause the abnormal noise of the paper tube machine bearing.

        Before the operation, the paper tube machinery and equipment should be inspected for safety, and run empty. After confirming that it is normal, it can be put into operation. The equipment is strictly forbidden to operate with the pagoda paper tube machinery malfunction. Do not use it to prevent accidents; Paper tube machinery and equipment must also undergo safety inspection in accordance with regulations during operation. When the paper tube equipment is running, the operator must not leave the work post to prevent unmanned disposal when problems occur; paper tube machinery and equipment are strictly prohibited to adjust by hand; Do not measure parts by hand, or lubricate or clean up debris.
        If it is necessary, the machinery and equipment should be shut down first; the knives, jigs and processed parts used in the paper tube machinery must be firmly installed and must not be loose; the paper tube machinery must be used correctly according to regulations, and must not be used. It is removed and not used; after the work is completed, the switch should be turned off, the tool and the workpiece should be withdrawn from the working position of the paper tube machinery and the work site should be cleaned up. The parts and fixtures should be neatly arranged to clean the paper tube machinery. That's it.
        The knives, jigs, and processed parts used in paper tube machinery and equipment must be firmly installed and must not be loose.
        The mechanical safety device must be used correctly in accordance with regulations, and it must never be removed and used.
        When the paper tube machinery is working, the operator should pay attention to whether there is any abnormality in the process and cannot leave the post without authorization to prevent accidents. After work, shut down the equipment, clean up the site, and ensure the hygiene of the paper tube machinery and equipment.