When using the paper cutting machine, we should be familiar with its usage. The following are the detailed operation steps of the paper cutting machine:
1. Switch on: The machine is connected to the compressed air, the person stands facing the operation panel, turns on the main power, turns on the power switch of the device, and presses the start button. At this time, the number displayed on the operation panel represents the position of the cutter.
2. Loading the paper tube: Turn the handle of the cylinder valve on the right end of the fuselage downwards. At this time, the paper tube chuck on the left end of the rotating shaft is opened, and the fixing device on the right end of the rotating shaft is opened. Pass the paper tube from the right end to the left end , Lift the handle of the cylinder valve upward, clamp the paper tube and fix the rotating shaft.
3. Cutting: Turn the cutter platform handwheel, adjust the cutter to a position about 15 mm to the left of the right end of the paper tube, and press the "Start" key to rotate the rotation axis. Press the "feed" button, the cutter is close to the paper tube to cut, immediately after the paper tube is cut, press the "return" button, press the "reset" button to clear the position on the operation panel. Move the cutter platform to the left so that the number on the operation panel is the same as the length of the paper tube to be cut, cut into the cutter, and return to zero. At this time, the production of a target paper tube is completed. Move the cutter platform to the left to continue making the next paper tube.

4. Paper unloading tube: When the paper tube on the rotating shaft is cut, press the "Stop" key, twist the handle of the cylinder valve downwards, remove the paper tube, and place it in a sorted manner. Continuous production: repeat the above steps