Slitting machine is a mechanical device that cuts wide-width paper, mica tape or film into multiple narrow-width materials. It is commonly used in papermaking machinery, wire and cable mica tape and printing and packaging machinery. So in addition to these advantages, what other advantages of the slitting machine, the slitting machine manufacturers to take you to understand:
1. The man-machine interface control set by the integrated program, data acquisition, setting is simpler, more reasonable is that it can be adjusted at any time during the cutting process.
2. The use of PLC imported from Europe, America and Japan, complete electrical, pneumatic parts, seals, bearings and other important or high-wear components, increase the reliability of the web slitter and extend the service life of mechanical equipment. Can enjoy lifetime maintenance.
3. Set up an automatic alarm system. Once a fault occurs, the warning signal sounds and the fault diagnosis report will be displayed on the man-machine interface. Through the fault report, the operator can quickly find the cause of the fault and eliminate it. It is easier to restart the recovery system. That is, when there is a problem with the machine settings, only power off and restart the web slitter, everything can be returned to the initial setting.
4. The operation is simple, one person can open one machine or even several machines, avoiding waste of human resources and saving production costs.
5. Diagonal automatic angular adjustment system, simple and accurate, convenient and direct.
The slitting machine is especially suitable for slitting mica tape, paper, insulation materials and various film materials, especially for narrow belts (non-woven fabric, paper, insulation materials, mica tape, films, etc.). So what is the principle of the slitting machine? The slitting machine manufacturers will take you to understand:
1. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
2. The slitting control of the paper slitting machine is divided into static and dynamic slitting: when the set length is reached, the machine is stopped accurately, and then the static slitting is processed, and then restarted after the slitting; when the set length is reached, it is not The cutting signal is issued when the machine stops, and the cutting machine dynamically cuts and processes during the movement of the material.
3. The paper slitter needs to cut the entire roll or the whole raw material with a fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., and must use fixed-length cutting. control.
Fully automatic slitting machine is a kind of mechanical equipment that slits wide paper or film into multiple narrow materials. It is often used in printing and packaging machinery. What are the prerequisites for stable operation? Let's take a look:
1. Before the equipment is ready for operation, all personnel must notify leaving the equipment to ensure personal safety before starting operation.
2. During operation, do not touch the film roll or roller core in operation with your hands, so as to avoid the risk of personal injury caused by the hands.
3. During the operation, avoid scratching or cutting each roller core with a knife or hard object.
4. Make sure the voltage, current and hydraulic pressure are correct and stable before starting.
The first package: Before the equipment is put into operation, check whether each working position is adjusted properly. Lubricating parts should be filled with grease in advance. Check whether the tool is sharp.
After everything is normal, you can run empty car first, check for abnormalities, and enter the order to be processed into the computer order inspection in advance;
After the equipment is put into operation, the best working state of the equipment should be adjusted in time according to the production situation, to ensure that the slitting machine has moderate indentation, no burrs in the slitting, and the appropriate trimming position on both sides. Ensure that the cross-cutting machine feeds and discharges smoothly, and the cutting length is accurate. For the cross-cutting machine connected with production management, it also needs to monitor its operation status from time to time to prevent paper jams and defective products;
After the work is completed, clean up the dust and paper dust on the equipment in time, check the cutters and grinding wheels, drain the water in the oil water leveler and the gas storage tank, and check the operating parts for abnormalities. Then, cut off the power according to the operation requirements of the manual, and maintain the computer operating system.
The non-woven slitting machine is equipped with a high-precision deviation correcting device system to further ensure the cutting accuracy; the product installation needs to be installed according to the instruction manual, so as to ensure the normal operation of the product in the future, the slitting machine manufacturer will take you to learn more:
There are many types of products today, and with the continuous innovation of technology, the updated products meet the needs of people more and more, especially the products of the company, the performance is also constantly improved.
1. The non-woven fabric cutting machine is welded by thick steel plates to be firm and balanced in angle, so that the machine is stable under high-speed working conditions;
2. The non-woven slitting machine adopts chrome-plated steel tubes, each of which is subjected to dynamic balancing treatment;
3. Unwinding adopts 3-inch air-expansion unwinding shaft, the maximum unwinding diameter can reach 600mm
4. Rewinding adopts 3-inch air-expansion reel and magnetic powder tension controller for rewinding, simple slitting operation, the maximum rewinding diameter can reach 600mm; rewinding is beautiful and tidy;
5. The cutting knife can use industrial surgical blade or flat knife (art cutter) 18 [2] mm-1600mm adjustable knife;
6. The spindle and round knife use a stepless speed change system, which can be used as high and low speed control and positive and negative switching control; electronic speed control system is convenient and simple;
7. Equipped with double-sided diamond grinding and grinding system; no need to dismantle to sharpen the blade to keep the blade sharp for a long time; to achieve the best cutting quality; with a vacuum loading capacity to keep the cloth and track clean;
8. The imported precision ball screw and slide rail are used to advance the cutting width in parallel, and the imported AC motor adjustment system continuously adjusts and controls the cutting speed to achieve high-precision cutting, and the accuracy can be controlled within 0.1 mm;
After reading the above introduction, everyone must have a clearer understanding of the slitter.
Fully automatic slitting machine greatly facilitates our lives, mainly used in papermaking machinery and printing and packaging machinery, etc. So what are the precautions, let's take a look:
The automatic slitting machine runs smoothly, the closing paper roll is firm, and the noise is low; both sides of the slitted paper strip are smooth and flat, very beautiful, without burrs; the design is reasonable, light weight, simple, and cheap. Pay attention to the following problems during the use of the automatic cutting machine:
1. Make a comprehensive cleaning and inspection of the machine on a regular basis. The automatic cutting machine has not stopped for such a long time. Wipe the surface and apply anti-rust oil, which can increase the service life.
2. Before starting to check the voltage, the correct and stable current is equal.
3. Before the equipment is ready for operation, all the staff nearby must stay away from the equipment to ensure personal safety before starting operation.
4. When running, don't touch the film roll or roller core in hand, do not draw a knife or hard object per roll core, in order to avoid being caught in the machine, causing personal injury.
Fully automatic slitting machines are commonly used to cut and process metals, and are widely used in the metallurgical industry. If the automatic slitting machine can reach the expected service life, we should carry out regular maintenance and repairs. So what should we do to maintain and repair it? Let me introduce you to the following.
1. Lubrication of the oil path of the automatic slitting machine is an important part of maintenance work. Paper machine oil to keep the road clear, so that the automatic cutting machine can work efficiently and orderly.
2. Regularly change the oil of the automatic cutting machine and clean the oil line filter device to avoid part of the oil clogging.
3. Keep the parts of the automatic slitting machine clean, lubricated and flexible so that it can clear the accumulation of ink on the machine in time, so the production efficiency is high.
4. Keep the internal relay contacts of the electrical control box of the machine clean to prevent the machine from running normally due to too much dust.