Fully automatic slitting machine is a kind of mechanical equipment that slits wide paper or film into multiple narrow materials. It is often used in printing and packaging machinery. What are the prerequisites for stable operation? Let's take a look:
        1. Before the equipment is ready for operation, all personnel must notify leaving the equipment to ensure personal safety before starting operation.
        2. During operation, do not touch the film roll or roller core in operation with your hands, so as to avoid the risk of personal injury caused by the hands.
        3. During the operation, avoid scratching or cutting each roller core with a knife or hard object.
        4. Make sure the voltage, current and hydraulic pressure are correct and stable before starting.
The first package: Before the equipment is put into operation, check whether each working position is adjusted properly. Lubricating parts should be filled with grease in advance. Check whether the tool is sharp.
        After everything is normal, you can run empty car first, check for abnormalities, and enter the order to be processed into the computer order inspection in advance;
        After the equipment is put into operation, the best working state of the equipment should be adjusted in time according to the production situation, to ensure that the slitting machine has moderate indentation, no burrs in the slitting, and the appropriate trimming position on both sides. Ensure that the cross-cutting machine feeds and discharges smoothly, and the cutting length is accurate. For the cross-cutting machine connected with production management, it also needs to monitor its operation status from time to time to prevent paper jams and defective products;
        After the work is completed, clean up the dust and paper dust on the equipment in time, check the cutters and grinding wheels, drain the water in the oil water leveler and the gas storage tank, and check the operating parts for abnormalities. Then, cut off the power according to the operation requirements of the manual, and maintain the computer operating system.