How many steps are there in the operation process of the electric programmable paper cutter? Today, the editor will give you a specific talk
Operation process of program-controlled paper cutter:
1. The operation process of the program-controlled paper cutter manufacturer should check the machine and do the cleaning work before starting, add oil or butter, try the empty knife three times, and observe whether there is a return knife. If a problem is found, it should be eliminated in time. During the production process, if there is a return knife, you should park the car immediately and repair it in time.
2. When working, you must concentrate, and it is strictly forbidden for two people to operate at the same time.
3. When the machine is running, it is strictly forbidden to put your hand into the machine. If a fault occurs, it is strictly forbidden to grab the paper by hand, and you should stop the machine immediately.
4. When the operation flow of the program-controlled paper cutter manufacturer is adjusted and the cutter is replaced, it must be stopped. Even when the machine is stopped, it is strictly forbidden to put your hand under the knife to change the knife. Long-handle bolts and other tools should be used to change the knife. The knife must be removed during the test to avoid accidentally hurting the operator when the machine is started.
5. The machine must be cut off when adjusting the machine, changing the blade, and when repairing, refueling, scrubbing and inspecting the equipment.
In the paper industry, a paper cutter is a device that can cut paper into flat paper. As a traditional product, the paper cutter is one of the most important equipments for printing, papermaking and other industries. According to the different cutting knives, it is divided into flick cutter and flat cutter. According to different control methods, it is divided into automatic paper cutter, program-controlled paper cutter, digital display paper cutter and so on. Different paper cutters have different uses, and the price of paper cutters also varies.
During the cutting process with a paper cutter, the choice of the angle of the cutting edge of the cutting knife is very important. A good paper cutter needs to be equipped with a good blade and knife grinding process. Many users often ignore the problem of blades when using paper cutters. If the sharpening method, method, angle, etc. of the cutting knife are not correct, the impact during cutting will increase, resulting in loosening or even breaking of the safety screw, resulting in acute injury.
With the rapid development of the economy, various domestic enterprises began to sprout. This is an indispensable thing for the daily office of the enterprise. The paper cutter, as an important equipment for paper processing, has also become a variety of enterprises One of the products that must be purchased, and the price of the paper cutter also changes with the market demand.
But not only domestic paper cutter suppliers have smelled the increased business opportunities of enterprises, but various foreign paper cutter manufacturers have also entered the market following this trend. However, due to the late start of domestic paper cutter manufacturers, there are deficiencies in technology and performance, and it is inevitable that foreign paper cutters will seize the market.
And due to tariffs and labor, the price of domestic paper cutters can theoretically be much lower than that of foreign paper cutters. However, due to performance reasons, users still prefer foreign products.
Paper cutter is a machine used to cut paper. To cut paper, a knife is essential. The general manufacturers will use ordinary carbon steel as the main material of the cutter of the paper cutter. The reason is that the strength and hardness of the carbon steel are increased, which is more suitable as the main material of the cutter.
The deeper paper cutter manufacturers will use a variety of different materials to manufacture the cutters of the paper cutter. Even after producing a paper cutter, a variety of different types of cutters will be reserved for the main reasons for consideration. It lies in the different products cut by the machine.
Many paper cutter manufacturers will think that since the name of the paper cutter is, its function is only to cut paper. However, with the update of office products, more and more products of different materials need to be cut, such as cardboard, plastic or even leather. For these materials, carbon steel can not be used as the main material of the cutter of the paper cutter, but stainless steel, chromium alloy and other materials should be used to deal with the cutting of different materials.
1. Materials
In the actual use process, the cutting objects that the paper cutter faces are various, in addition to paper and cardboard, there are leather, plastic, cork flooring and PS version. Due to the wide variety of materials to be cut, different paper presses should be used for different materials, and the angle of the cutting blade should be changed to ensure high-quality cutting products.
Second, the cutting edge angle
The choice of cutting blade angle is a very important part of the cutting work. In other words, a good paper cutter must be equipped with a good paper cutting blade and sharpening process. However, we have found in the after-sales service of the paper cutter that many paper cutter users often ignore this point. As a result, the impact of the cutting blade is increased because of the wrong way, method and angle of the cutting blade. , Resulting in loosening or even breaking of the safety screw, which ultimately causes mechanical damage.
The range of materials that need to be cut with a paper cutter is becoming wider and wider, such as beer aluminum foil caps, carbonless carbon paper, honeycomb paperboard, magnetic cards, photosensitive film, etc. These materials will encounter different practical problems during the cutting process. For example, carbonless copy paper is prone to indentation during cutting, and the magnetic card and photosensitive film may not be fixed by the paper presser during cutting, re