How many steps are there in the operation process of the electric programmable paper cutter? Today, the editor will give you a specific talk
       Operation process of program-controlled paper cutter:
       1. The operation process of the program-controlled paper cutter manufacturer should check the machine and do the cleaning work before starting, add oil or butter, try the empty knife three times, and observe whether there is a return knife. If a problem is found, it should be eliminated in time. During the production process, if there is a return knife, you should park the car immediately and repair it in time.
        2. When working, you must concentrate, and it is strictly forbidden for two people to operate at the same time.
        3. When the machine is running, it is strictly forbidden to put your hand into the machine. If a fault occurs, it is strictly forbidden to grab the paper by hand, and you should stop the machine immediately.
        4. When the operation flow of the program-controlled paper cutter manufacturer is adjusted and the cutter is replaced, it must be stopped. Even when the machine is stopped, it is strictly forbidden to put your hand under the knife to change the knife. Long-handle bolts and other tools should be used to change the knife. The knife must be removed during the test to avoid accidentally hurting the operator when the machine is started.

        5. The machine must be cut off when adjusting the machine, changing the blade, and when repairing, refueling, scrubbing and inspecting the equipment.