High-speed slitting machines are generally used in the paper industry. If improperly operated, not only the work efficiency is reduced, but they are also prone to failures. Let's take a look at how to operate the high-speed slitting machine correctly?
         In strict accordance with the company's safety regulations, check whether the work clothes are buttoned properly. Before starting the machine, you must check the rotating parts for debris and lubricating oil. If there is any abnormal situation during the operation, it must be stopped and checked, and it is strictly prohibited to handle it during operation. It is strictly forbidden to operate the machine during machine maintenance. If maintenance is required, it must be stopped after jogging.
        Operate the slitting machine safely and maintain it regularly. First of all, the cutting machine must clean the roller before use, and then check whether the blade is rusted. If it is rusted, it should be replaced immediately. Fix the diaphragm to be cut on the diaphragm holder at the back of the machine. The diaphragm must be fixed. Pull the diaphragm apart to align the blade position to separate into a small diaphragm of the required size, and fix it on the paper tube sleeve. The diaphragm shaft needs to be cut, and the mold, blade shaft, and winding shaft must be flush.
        Turn on the power switch, start the machine, try to cut, and check whether it meets the required size requirements. After confirming the pass, adjust the appropriate speed to cut the diaphragm. After slitting the whole roll of diaphragm, turn off the power switch of the machine, put a sticker on the surface of the small roll of diaphragm, and mark the specification model. After the slit membrane is qualified by QA inspection, use a plastic bag or carton for dustproof storage and reserve, or transfer to the next process for winding.

        The above is the correct operation method of the high-speed slitting machine, I believe everyone already knows.