The paper slitter is composed of many structures. Let's take a look at the structure of the paper slitter with us.
        1. Frame and transmission system: The frame is composed of left and right wall panels, supporting blocks and unwinding machinery. The transmission system is mainly used for traction of raw materials and winding of finished products. It is a variable frequency stepless speed regulation motor that passes power through the motor V The belt drives the traction rubber roller, the main traction rubber roller and the driven traction rubber roller are in close contact and synchronously move the traction raw material. The active traction roller drives the lower round cutter shaft to run synchronously to achieve better cutting requirements. The cutter shaft drives the winding A and winding B to run synchronously, so as to achieve the purpose of receiving.
        2. The feeding mechanism is mainly composed of synchronous belt, synchronous wheel, magnetic powder clutch, and inflatable shaft. The main power is transmitted from the synchronous belt to the synchronous wheel to run the input shaft of the magnetic powder clutch, as long as the current of the magnetic powder clutch is adjusted , You can change the tension of the receiving shaft.
        3. Slitting knife holder: the slitting knife holder has round knife slitting and flat knife slitting. Operating the handle through the flat cam can make the round knife move slightly axially to adjust the shear of the round knife edge and the groove of the cushion sleeve gap.
        4. Traction member: The traction member is mainly composed of a pair of traction rubber rollers and a number of hard oxidized aluminum rollers, which are used to collect the raw materials to walk for the winding of the finished product. Its power comes from the motor transmitted to the active through the V-belt Pull the rubber roller to make it run.

        After reading the above, I believe everyone already knows the structure of the paper slitter.