Compared with the traditional peritoneal equipment, the automatic laminating machine has the advantages of high production efficiency, smooth operation, and more humanization. It saves the production cost for the user and improves the production efficiency.
Configuration functions and features of automatic laminating machine:
1: The machine uses Feida paper feeding, with pre-push paper function to improve production efficiency;
2: Adopt servo motor and high-precision side-pulling gauge to make the paper automatically correct and improve the accuracy of peritoneum;
3: Adopting immersion coating, automatic glue supply cycle, simple and convenient operation to make the coating more uniform;
4: Paper counting is set, and the machine will automatically stop when there is no paper;
5: Frequency conversion deceleration, PIC, touch screen control, user-friendly operation.

Saving film when operating a hot laminating machine can greatly save costs. This is also the most basic operating specification of the laminating machine. Here are some suggestions on how to save film:
When laminating, attention should be paid to the texture direction of the film, especially the thick film, to reduce the phenomenon that the film is curled due to rolling and stretching.
Laminating machine should pay attention to control the speed, control the speed according to actual experience and material changes, try to maintain a uniform speed;
The film material must be straight. Irregular films with "lotus edge" and "tight edge" phenomena should be treated. The "lotus leaf" film can be baked, and the "tight edge" paper can be hung.
The temperature is generally controlled to 40 ~ 60 ℃. Too high a temperature will deform the film and cause the product to curl, but not too low, otherwise it will cause insufficient viscosity. According to the different coating materials, you can control the temperature according to your actual experience, so as to save the amount of film to the greatest extent.

1. Operate reasonably in accordance with the rules of the manual, and prohibit all improper operations
2. Regularly check the parts of the laminating machine to see if it is damaged, and replace it immediately if it is damaged
3. For the water coming from the flower planter, the height of the ridge can be increased when the earth shovel is lowered, but at the same time, the sowing opener and the depth-limiting roller barrel should be raised to the corresponding parts. When the earth shovel is raised, the height of the ridge can be reduced At the same time, the sowing opener and the depth-limiting barrel should also be adjusted down to the corresponding position. A good laminator, not only requires the operation specification, but also the maintenance is equally important, strictly follow the operation and maintenance regulations of the laminator , Develop a good habit of using the laminating machine in order to extend the life of the machine.

The pre-coating film is a special one in the laminating process. In addition to the many advantages of the laminating process, it also increases the visibility function of the product in the packaging. The colorful printing patterns are embedded with beautiful curves. The viewing window not only makes the packaging more exquisite, but also plays the role of propagating and beautifying the commodity and revealing the value of the commodity, which has become an effective means to realize and increase the value of the commodity. The difference between its laminating principle and general laminating machine lies in:
1. It coats the adhesive on the surface of the film, and then covers the film on the surface of the printed product, and then presses it into the finished product;
2. The special advantage of the pre-coated film is that it can be automatically sprayed and can be automatically removed by heating and dissolving the powder by using the viscosity of the glue.
The pre-coated film process does not require a binder heating and drying system for the film coating equipment. It is easy to operate and can be turned on at any time. It has large production flexibility, no solvent odor, no environmental pollution, and more importantly, it can completely avoid bubbles and delamination. In case of failure, the transparency of the finished product is extremely high.

1. Trouble shooting of small laminating machine
Now when we operate a small laminating machine, we often see some cases where the machine cannot be started. Then, at this time, we need to test the entire power supply. First, we need to see whether the power supply is connected. If the connection is not good, then it is impossible to start. In addition, when we check whether the power supply is connected, we also need to pay attention to our power cable connection error. This is also a problem that many people often encounter, but, All of them appear at the first startup. If the situation does not start after a long time of use, then this problem will generally not appear. Finally, when the small laminating machine cannot start, we need to detect whether the voltage of the power supply is enough, because the small laminating machine is a machine with relatively large power consumption, and there are certain requirements for the voltage in the process of use. So we need to safely check whether the voltage meets the standard.
2. Temperature control of small laminating machine
In the working process of small laminating machines, it is often the case that the temperature detection is inaccurate, that is to say, we will have some work failures due to temperature errors during the operation, and the high and low temperatures will affect our Normal use makes our entire work in trouble. Therefore, we need to strictly check whether the temperature controller has a fault when the temperature is inaccurate. Once a fault occurs, it needs to be repaired in time, so that we can use it. More relaxed.
The common troubleshooting of small laminating machine is introduced here for everyone, I hope to help you.