1. The machine of the automatic laminating machine does not start: the input wire is disconnected, the power cord is reversed, and the voltage is not enough.
2. When the film is not sucked up, the film is pulled down: whether the solenoid valve or hand valve is open.
3. Inaccurate temperature measurement: thermocouple, temperature controller. Whether the installation is incorrect and damaged.
4. Breaking phenomenon: the temperature is too high, the heating time is too long, the film quality is not good, and there is no heating.
Fifth, the main power switch trips: the leakage of the input wires on the top of the heating box, the leakage of the distribution box, the external wires are laid on the equipment, and the leakage of the motor.
Sixth, the working vacuum is not up: the gas path is not open, the hand valve or the solenoid valve is not closed, the vacuum pump motor belt is loose, and the vacuum gauge is damaged.
Seven, the film is not in place: the vacuum is not enough, the air leakage, the temperature is not enough, the film is too thin, the workpiece is pasted with other materials, the concave depth of the workpiece exceeds the film lift, the automatic laminating machine suction time is too short, the film is not Pull up, the workpiece is too close.
8. The surface of the overlaid workpiece has folds and is not smooth or the corners cannot be wrapped: the film is not straightened, the quality of the film is not good, the workpiece is not well polished, the glue is sprayed too much, and the mold below the workpiece is too low.
The heated rubber roller receives the heated melted glue on the laminated film, and then applies it to paper or cards with the rubber roller. The use of rollers means that the adhesive can be diffused more evenly, eliminating the damage of air bubbles on the laminate. Laminating machine rolls can be used for large-size lamination, often used in the printing industry to laminate posters, magazines, postcards, and booklets. This example laminating machine is also widely used in homes, offices and schools. If the content of the film is easily damaged by heat, cold-rolled rubber rollers can be accepted.
In order to obtain aspiring laminating results, not only adhesives, plastic films and printed products are required to have excellent adhesive compliance, but also a compliant laminating equipment deployment. Laminating equipment deployment can be divided into two major categories, namely coating film machine and pre-coating film machine. That is, the coating film machine has a wide practical range and stable and reliable processing performance. It is now widely used in the deployment of coating equipment in China. Pre-coating film machine, no gluing and drying department, small size, low cost, convenient operation and maneuvering, not only practical laminating processing of large batches of printed products, but also practical and automatic desktop office system and other small batch, sporadic printed film laminating processing .
Automatic cutting device: The cutting length can be set freely according to the paper size, and the speed can be controlled freely. The linkage operation system of the unit, with the speed of the host, is automatically increased and decreased, the operation is simple, the labor cost is saved, and the labor intensity of the operator is reduced. Knife disc rotating blade design, 4 sets of blades of rotary knife seat, can be fine-tuned and controlled, easy to operate; when adjusting, cooperate with the pressure roller to interact. Equipped with a reverse paper roller, it can cut thin paper, and papers of more than 128 grams can be automatically cut online; equipped with an automatic winding device, which can be rolled into a roll for paper with poor quality and hardness.
The film unwinding shaft of the automatic laminating machine adopts magnetic powder braking to maintain stable tension. The unique pneumatic film stretching device ensures the tightness of the film during film pressing and film lifting, which effectively prevents the film rolling failure.
The small film laminator has a small footprint, simple operation and fast speed. The feeding table adopts a conveyor belt, and the output adopts a powered roller, which can withstand heavy heavy plates. It is widely used in stainless steel plates, aluminum plates, aluminum plastic plates, UV baking paint plates, iron plates, decorative cabinet doors, baking paint plates, paint panels , Acrylic board, color steel plate, fireproof board, plexiglass board, cabinet door laminating machine, signage, high-end furniture board, color coated board, electrical appliance PVC and other flat coating, affixed, pressed with self-adhesive PE protective film, Electrical cabinets, decorative films, etc., in order to prevent pollution, corrosion, power transmission and scratches during production, processing, transportation, storage and use, protect the original smooth surface and the explosion-proof lens.
This series of film laminating machine is composed of upper and lower rubber rollers, frame, power transmission and control device, film supporting frame, etc. It has the characteristics of flat film lamination, no wrinkles, no bubbles, simple operation and long service life.
1. Operate reasonably in accordance with the rules of the manual, and prohibit all improper operations
2. Regularly check the parts of the laminating machine to see if it is damaged, and replace it immediately if it is damaged
3. For the water coming from the flower planter, when the earth shovel is lowered, the height of the ridge can be increased, but at the same time, the sowing opener and the depth-limiting barrel should be raised to the corresponding level
When the earth shovel is raised, the height of the ridge can be reduced, and at the same time, the sowing opener and the depth-limiting barrel should also be adjusted downward to the corresponding position.
A good laminating machine not only requires the operation specifications, but also the maintenance is equally important. Strictly follow the regulations on the operation and maintenance of the laminating machine, and develop a good habit of using the laminating machine, so as to extend the life of the machine.