The normal operation of the high-speed cutting machine is inseparable from the tension detection system, so what constitutes the tension detection system?
        1. Floating roller indirect tension detection system: a set of floating roller is installed in front of the tracking roller. The position of the floating roller is detected by a potentiometer. The method of tension control is to maintain the constant tension by keeping the position of the floating roller unchanged.
        2. Tension sensor detection is a direct detection of tension, which is closely integrated with the machine and has a detection method of moving parts. Usually two sensors are used in pairs, and they are installed on the end shafts on both sides of the detection guide roller. The material belt detects the applied load on both sides of the guide roller to cause displacement or deformation of the tension sensor sensitive element, thereby detecting the actual tension value, and converting this tension data into a tension signal and feeding it back to the tension controller.
        3. A magnetic powder clutch is used to control the input torque of the winding roller to achieve tension control: the magnetic powder clutch is composed of an active part and a driven part, is connected to the winding roller through a universal coupling and other transmission mechanisms, and is filled with fine ferromagnetic powder in the middle As a torque transmission medium.

        After reading the above, I believe everyone already knows the tension detection system of the high-speed slitting machine.