Many people have a direct mindset for starting up the automatic slitting machine. In fact, this is also a kind of damage to the equipment. Before starting up, we need to carry out many checks on the automatic slitting machine.
        1. Before starting the machine, you must confirm whether the equipment is in good condition, check the equipment for oil leakage, air leakage, loose screws and other phenomena. Only after the workshop leader and equipment personnel approve, can they start the machine.
        2. The main operator must arrive in advance, see the plan sheet to understand the batch number of the aluminum coil to be produced by this class, and then find the coil, and arrange the auxiliary operator to prepare the aluminum die.
        3. Must clearly see the production plan and understand the quality requirements of the cut rolls.
        4. Supervise whether the hygiene of the last shift has been cleaned and whether the hanging roll has been hung up. If the last class does not finish what has to be done, be sure to call the last class to complete the work and then get off work. Under special circumstances, the work of the last class cannot be completed. Be sure to clarify with the next class's main operation and take over the main operation After you agree, you can leave work.
        5. Check if there are marks and dirt on the front and back flattening rollers. If there are marks that affect the quality of the finished product, you must change the roller and do it again; if there are dirt, wipe the roller clean with gasoline or alcohol.
        6. Carefully check the plan sheet and the process card to ensure that the two are correct. If the plan sheet and the card are found to be inconsistent or unclear and difficult to confirm, you should contact the planner in time and reflect the situation to the planner. Please ask the planner Puzzle.

        After reading the above, I believe everyone already knows the precautions for the automatic slitter.