For how to use the automatic slitting machine, many people can't tell why. The following slitting machine manufacturers will tell you how to use the automatic slitting machine correctly?
        When using the slitting machine, when you turn on the power, you must first check whether the static elimination mode has been turned on. This is to prevent the machine from malfunctioning and causing unnecessary losses during operation. (Static mode will control the system). Next, turn on the air pressure switch of the slitter and adjust it to between 0.5 and 0.6. The adjustment of air pressure is very critical, because it will affect the stability of operation. After adjustment, use three to six cones to place the mother roll in the roll section.
        After the mother roll is placed in the roll section, the machine should be debugged, the diameter of the mother roller should be compared, press the up or down button, adjust the unwinding rack to the appropriate height, and then clamp the roll film to make it It can rotate at a constant speed or quickly, and then press the height adjustment button again to confirm the safety. Then to install the blade, first check the blade edge of the blade to see if there is any damage, and then select the appropriate cutting method according to the needs and adjust the placement of the blade. After this step is completed, the paper core module can be debugged.
        The adjustment of the paper core is to enable the paper to be placed in a relatively correct position, so that the cut pieces of paper will be very uniform. After all the commissioning work is completed, a unified trial operation of the slitter should be carried out. When the trial production products have no problems, they can be used.

        After reading the above, I believe everyone already knows the correct use of the automatic slitter.