Many people cannot operate flexibly when operating a high-speed cutting machine, which results in the high-speed cutting machine working efficiency is not high or can not work normally, so how to use the high-speed cutting machine flexibly?
        First of all, before using the slitter, you should first sweep out all the safety hazards in the operation site. At the same time, pay attention to check whether the slitter data is normal, check whether the voltage is normal, and whether the current is normal and stable.
        Secondly, turn on the power switch of the hydraulic system of the slitter to check whether the oil level and pressure gauge of the main hydraulic drive system are correct and stable. Again, open the pneumatic shut-off valve of the slitter to check whether the air pressure is correct and stable.
        Next is the setting control of the paper tube machine of the slitter, and the slitting menu is set according to the film type, thickness, length, width, etc. arranged in the slitting plan. File the corresponding BOPP film file from the PDF. Set the winding length and width of the corresponding standard film. Select the corresponding winding station, adjust the roller arm and roller, and install the paper core of the corresponding specifications.
        Then, it is the feeding of the slitter paper tube machine, and the film is passed through. After all, it is the start-up operation and application control of the slitting machine.

        After reading the above, I believe everyone already knows the flexible use of high-speed slitting machines.