During the operation of the paper slitting machine, it is prone to many problems, so what are the problems? Let ’s take a look together.
        1. The lower roll of the slitter is connected with the two paper rolls. If the paper is not cut, it is a small problem that often occurs. If this problem occurs, you must first check whether the blade of the paper cutter is flawless. If not, check the paper cutter. Check whether the knife is attached to the bottom knife after the knife is loaded.
        2. When the cutting machine is not in the up position of the paper cutter, first check whether the external limit is normal, and then check the gear box of the paper cutter. If the oil level is too low and the rise is not enough, check the three-row chain of paper cutters. Not that the chain is stretched too much.
        3. When the manual cutting runout of the cutter blade of the slitter is large, remove the cutter head and replace the upper cutter shaft.

        4. When the cutter blade is attached to the roller during the ascent of the cutter of the slitter, first check whether the cylinders on both sides of the cutter are operating normally during the ascent. If one of the cylinders does not operate, the cutter blade will stick to the roller surface. The cylinder needs to be replaced.